Friday, December 31, 2021
Hướng dẫn sử dụng Đồng hồ Nữ Baby-G BGA-240-7A2DR, mẫu mã mới
Download!
MO1612-EA © 2016 CASIO COMPUTER CO., LTD. Operation Guide 5510 About This Manual • Button operations are indicated using the letters shown in the illustration. • Depending on the model of your watch, display text appears either as dark figures on a light background, or light figures on a dark background. All sample displays in this manual are shown using dark figures on a light background. • Note that the product illustrations in this manual are intended for reference only, and so the actual product may appear somewhat different than depicted by an illustration. E-1 • Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be found in the "Reference" section. E-2 Recall Mode ……………………………………………………………………………E-24 To recall stopwatch time records………………………………………………E-25 To delete a log …………………………………………………………………E-27 Countdown Timer………………………………………………………………………E-28 To use the countdown timer ……………………………………………………E-29 To configure countdown start time and auto-repeat settings ………………E-30 Alarms ……………………………………………………………………………………E-32 To set an alarm time ……………………………………………………………E-34 To test the alarm ………………………………………………………………E-36 To select the operation of Alarm ……………………………………………E-37 To turn Alarms and on and off ……………………………………………E-38 To turn the hourly time signal on and off ……………………………………E-38 Dual Time ………………………………………………………………………………E-39 To set the Dual Time ……………………………………………………………E-39 E-4 General Guide • Press C to change from mode to mode. • In any mode (except when a setting screen is on the display), press B to illuminate the face of the watch. Contents General Guide ………………………………………………………………………… E-6 Timekeeping …………………………………………………………………………… E-8 To set the digital time and date ……………………………………………… E-9 To toggle between 12-hour and 24-hour timekeeping ………………………E-11 To toggle the Timekeeping Mode digital time between DST and Standard Time ………………………………………………………………E-12 To adjust the analog time ………………………………………………………E-13 Stopwatch ………………………………………………………………………………E-15 To measure elapsed time ………………………………………………………E-18 To measure elapsed time with lap times ……………………………………E-19 To measure elapsed time with split times ……………………………………E-20 E-3 Illumination ……………………………………………………………………………E-41 To illuminate the display manually ……………………………………………E-41 To specify the illumination duration……………………………………………E-42 To turn the auto light switch on and off ………………………………………E-44 Reference ………………………………………………………………………………E-45 To turn the button operation tone on and off …………………………………E-46 Specifications …………………………………………………………………………E-51 E-5 Countdown Timer Stopwatch Mode Timekeeping Mode C C Recall Mode C C Mode C C E-6 Hand Setting Mode C Dual Time Mode Alarm Mode E-7 Timekeeping Day of week Use the Timekeeping Mode to set and view the current time and date. This watch features separate digital and To set the digital time and date 1. In the Timekeeping Mode, hold down A until the seconds start to flash, which indicates the setting screen. Month – Day analog timekeeping. The procedures for setting the digital ll lll lll 2. Press C to move the flashing in the sequence shown time (page E-9) and analog time (page E-13) are different. ll ll below to select other settings. Minutes Hours PM indicator Seconds E-8 Setting the Digital Time and Date Use the Timekeeping Mode to set and view a digital display of the current time and date. When setting the digital time, you also can configure settings for the summer time (Daylight Saving Time or DST). Seconds Seconds Day DST Hour Month Minutes Year E-9 Operation Guide 5510 3. When the setting you want to change is flashing, use D and B to change it as described below. To do this: Screen: Do this: 4. Press A to exit the setting screen. • The day of the week is displayed automatically in accordance with the date (year, month, and day) settings. • See "Daylight Saving Time (DST) Setting" below for details about the DST setting. E-10 Reset the seconds to Press D. Toggle between Daylight Saving Time ( ) and Standard Time ( ) Press D. Change the hour or minute Change the year, month, or day Use D (+) and B (–). Use D (+) and B (–). To toggle between 12-hour and 24-hour timekeeping In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and 24-hour timekeeping. • With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for times in the range of noon to 11:59 p.m. and the A (AM) indicator appears to the left of the hour digits for times in the range of midnight to 11:59 a.m. • With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without any indicator. • The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is applied in all other modes. • The A and P indicators are not displayed with the Timekeeping Mode time on the Countdown Timer Mode and Dual Time Mode screens. E-11 Daylight Saving Time (DST) Setting Daylight Saving Time (summer time) advances the time setting by one hour from Standard Time. Remember that not all countries or even local areas use Daylight Saving Time. To toggle the Timekeeping Mode digital time between DST and Standard Time 1. In the Timekeeping Mode, hold down A until the Setting the Analog Time Perform the procedure below when the time indicated by the analog hands does not match the time of the digital display. To adjust the analog time 1. In the Timekeeping Mode, press C six times to enter DST indicator ll lll lll lllllllll ll l seconds start to flash, which indicates the setting screen. 2. Press C once and the DST setting screen appears. 3. Press D to toggle between Daylight Saving Time ( displayed) and Standard Time ( displayed). lllll llll lllll the Hand Setting Mode (page E-6). 2. Hold down A until the current digital time starts to flash, which indicates the setting screen. 3. Use D to adjust the analog setting. • Press D once to advance the hands 20 seconds. • Hold down D to advance the hands at high speed. On/Off status E-12 4. Press A to exit the setting screen. • The DST indicator appears on the Timekeeping, Alarm, and Hand Setting Mode screens to indicate that Daylight Saving Time is turned on. • To lock high speed hands movement, hold down D to start it and then press B to lock. The hands will continue to advance for one 12-hour cycle or until you press any button to stop them. E-13 • High-speed hand movement will stop automatically after the time advances 12 hours or if an alarm (daily alarm, Hourly Time Signal, or countdown beeper) starts to sound. 4. Press A to exit the setting screen. • The minute hand will be adjusted slightly to match the seconds when you exit the setting screen. • To return to the Timekeeping Mode, press C. Stopwatch Remaining free records The stopwatch lets you measure elapsed time, lap times, and split times. Lap times and split times can be stored in memory. • The display range of the stopwatch is 99 hours, 59 minutes, 59 seconds. • All of the operations in this section are performed in the Stopwatch Mode, which you enter by pressing C (page E-6). Note Hours Minutes 1/100 second • "Lap time" is the time spent to cover a specific segment of a race, such as one lap around a track. "Split time" is the time spent from the beginning of a race up to a Seconds E-14 certain point. • The stopwatch continues to run, restarting from zero after it reaches its limit, until you stop it. E-15 • The stopwatch measurement operation continues even if you exit the Stopwatch Mode. • For information about how stopwatch times are stored in memory, see "Memory Management" (page E-22). Viewing the Stopwatch Digital Displays The information that appears in the watch's upper and lower digital displays depends on whether you are measuring lap times or split times. Lap Time Measurement Upper Display: Lap time Lower Display: Elapsed time Split Time Measurement Upper Display: Lap time Lower Display: Elapsed time (Split time appears here for eight seconds as it is stored in memory.) E-16 • See "To measure elapsed time with lap times" (page E-19) and "To measure elapsed time with split times" (page E-20) for more information about each type of measurement. • You can perform elapsed time measurement starting from either the lap time screen or the split time screen (page E-19 and E-20). Whenever you enter the Stopwatch Mode, the screen (lap time or split time) that was displayed when you last exited the mode will appear first. • During a stopwatch elapsed time operation, the upper display initially shows minutes, seconds, and a 1/100-second value. This changes to hours, minutes, and seconds when the time in the upper display exceeds 60 minutes. • The lower display initially shows hours, minutes, seconds, and a 1/100-second value. This changes to hours, minutes, and seconds when the time in the lower display exceeds 10 hours. E-17 Seconds Minutes To measure elapsed time with lap times Minutes 1/100 second Hours More than one hour Seconds 1. When the stopwatch display shows all zeros, press A to display the lap time screen (indicated by /LAP). 2. Press D to start an elapsed time measurement. Seconds Minutes 1/100 second HoursMinutesSeconds • At the time, both the upper and lower displays will show identical times. Hours More than 10 hours Lap time llllllll lllllll l 3. Press A to record the time of the first lap. • This freezes the current lap time in the upper part of the digital display for about eight seconds, while To measure elapsed time Note • You can perform the following steps starting from either the lap time screen or the split time screen. 1. Press D to start the stopwatch. 2. Press D again to stop the stopwatch. • You can resume the measurement operation by pressing D. 3. Press A to clear the stopwatch to all zeros. E-18 llllllll lllllll l Elapsed time measurement of total elapsed time and the next lap time continue internally. The lap number of the displayed time appears in the lower digital display. • After eight seconds, the ongoing elapsed time measurement re-appears in the lower digital display. 4. Repeat step 3 to record more lap times. 5. Press D to stop the stopwatch. E-19 Operation Guide 5510 Lap time llllllll lllllll l 6. Press A to clear the stopwatch to all zeros. • Lap numbers are incremented automatically starting Split Time Recording (Displayed for eight 3. Press A to record the time of the first split. • The current split time appears in the lower display for from 1 whenever you press A in step 3 of the above procedure. The maximum lap number is 99. Recording a lap after that causes the lap number count to restart from 00. Lap number seconds after A is pressed.) Split number llllllll lllllll l about eight seconds, as the total elapsed time, next lap time, and next split time continue to be timed internally by the watch. The split number of the displayed time appears in the upper display. • After eight seconds, the ongoing lap time measurement appears in the upper display and the ongoing elapsed time measurement appears in the To measure elapsed time with split times lower display. Lap time llllllll lllllll l 1. When the stopwatch display shows all zeros, press A to display the split time screen (indicated by /SPL). Split time 4. Repeat step 3 to record more split times. 5. Press D to stop the stopwatch. llllllll lllllll l Elapsed time E-20 2. Press D to start an elapsed time measurement. • At the time, both the upper and lower displays will show identical times. 6. Press A to clear the stopwatch to all zeros. • Split numbers are incremented automatically starting from 1 whenever you press A in step 3 of the above procedure. The maximum split number is 99. Recording a split time after that causes the split number count to restart from 00. E-21 Memory Management A new log is created each time you press D in the Stopwatch Mode to start a new elapsed time measurement operation. A log contains a log title screen, and records of all the lap or split times you record during the current elapsed time measurement operation. • The capacity of the watch's memory is 60 records. • If you are adding records to the only log in memory and watch memory becomes full, adding another record causes the oldest record in the log to be deleted automatically to make room for the new record. • If you are adding records to a log when there are multiple logs in memory and watch memory becomes full, adding another record causes the oldest log in How stopwatch data is stored The following table shows how stopwatch data is stored when you perform stopwatch button operations. Stopwatch Button Operation Data Storage Description From all-zeros, press D to start. Creates a new log. Stores the date the button was pressed, and the new log number. Press A to display lap/split time.Creates a new record with each button operation. Stores the lap and split times and total elapsed time at each point the button is pressed. memory and all of its records to be deleted automatically to make room for new records. Press D to stop elapsed time measurrement and then press A to reset. Resets the elapsed time to all zeros without recording data. E-22 Recall Mode Day of week Month – Day Log number Log Title Screen E-24 Log Title Screen Use the Recall Mode to recall and delete logs and records you stored in the Stopwatch Mode. You can use the Recall Mode to view both lap and split time records. • When you enter the Recall Mode, the newest log recorded in the Stopwatch Mode will appear first. If there are no logs in memory, appears on the display. • You can use the Recall Mode to check memory data even while a stopwatch elapsed time measurement operation is in progress. However, the time data that is currently being measured will not appear in the Recall Mode. • You can convert a lap time saved in the Stopwatch Mode to a split time (page E-25). First record Last record Lap time Lap number Press D. Split number • See "Recall Mode" (page E-24) for details on how to recall time records from memory. E-23 To recall stopwatch time records 1. In the Stopwatch Mode, check to make sure that the displays are reset to all zeros (page E-19). • If all zeros are not displayed, reset the stopwatch. 2. Use the A button to select either the lap time screen (to view lap time records) or the split time screen (to view split time records) (page E-19 and E-20). • To convert a lap time saved in the Stopwatch Mode to a split time, select the split time screen. 3. Press the C button to enter the Recall Mode. 4. Use the A button to scroll through the log title screens from the newest to the oldest until the title screen of the log whose records you want to view is displayed. 5. Press D to scroll through the records contained in the log you selected in step 4, from the oldest to the newest. E-25 To delete a log 1. In the Recall Mode, display the title screen of the log you want to delete. 2. Hold down B and D until stops flashing on the display. • This deletes the log and all the records inside it. • Deleting a single log slides all newer logs (ones with higher log numbers) upwards to fill the empty space. This cause the log numbers of all the newer logs to be reduced by 1. If there are six logs currently in memory (numbered 01 through 06) and you delete log 03, the numbers of logs that previously were numbered 04, 05, and 06 will change to 03, 04, and 05. Log number Split time • Whether you will be able to view lap time records or split time records will depend on the screen you selected in step 2, above. E-26 Countdown Timer E-27 To use the countdown timer Press D while in the Countdown Timer Mode to start the countdown timer. Timekeeping Mode time Hours Seconds Minutes Auto-repeat on indicator E-28 You can set the countdown timer within a range of one minute to 24 hours. An alarm sounds when the countdown reaches zero. • You also can select auto-repeat, which automatically restarts the countdown from the original value you set whenever zero is reached. • All of the operations in this section are performed in the Countdown Timer Mode, which you enter by pressing C (page E-7). • When the end of the countdown is reached and auto-repeat is turned off, the alarm sounds for 10 seconds or until you stop it by pressing any button. The countdown time is reset automatically to its starting value after the alarm stops. • When auto-repeat is turned on, the countdown will restart automatically without pausing when it reaches zero. The alarm sounds when the countdown reaches zero. • The countdown timer measurement operation continues even if you exit the Countdown Timer Mode. • Press D while a countdown operation is in progress to pause it. Press D again to resume the countdown. • To stop a countdown operation completely, first pause it (by pressing D), and then press A. This returns the countdown time to its starting value. E-29 Operation Guide 5510 To configure countdown start time and auto-repeat settings 1. While the countdown start time is on the display in the Countdown Timer Mode, hold down A until the hour setting of the countdown start time starts to flash, which 3. Perform the following operations, depending on which setting currently is selected on the display. • While the start time setting is flashing, use D (+) and B (–) to change it. • Set to specify 24 hours. l ll indicates the setting screen. • If the countdown start time is not displayed, use the • While the auto-repeat on/off setting ( or ) is flashing on the display, press D to toggle auto-repeat on ( ) and off ( ). lll ll ll On/Off status procedure under "To use the countdown timer" (page E-29) to display it. 2. Press C to move the flashing in the sequence shown 4. Press A to exit the setting screen. • The auto-repeat on indicator ( ) is displayed on the Countdown Timer Mode screen while this function is turned on. Auto-repeat below, and select the setting you want to change. • Frequent use of auto-repeat and the alarm can run down battery power. on indicator E-30 Alarms Start Time (Hours) Start Time (Minutes) Auto-Repeat On/Off Alarm Types E-31 Alarm date (Month – Day) Alarm number You can set up to three independent multi-function alarms with hour, minutes, month, and day. When an alarm is turned on, the alarm tone sounds when the alarm time is reached. One of the alarms can be configured as a snooze alarm or a one-time alarm, while the other two are one-time alarms. You also can turn on an Hourly Time Signal that causes the watch to beep twice every hour on the hour. • There are three alarm screens numbered through . The hourly time signal screen is indicated by . • All of the operations in this section are performed in the The alarm type is determined by the settings you make, as described below. • Daily alarm Set the hour and minutes for the alarm time. This type of setting causes the alarm to sound everyday at the time you set. • Date alarm Set the month, day, hour and minutes for the alarm time. This type of setting causes the alarm to sound at the specific time, on the specific date you set. • 1-Month alarm Set the month, hour and minutes for the alarm time. This type of setting causes the alarm to sound everyday at time you set, only during the month you set. Alarm Mode, which you enter by pressing C (page E-7). Alarm time (Hour : Minutes) E-32 To set an alarm time 1. In the Alarm Mode, use D to scroll through the alarm screens until the one whose time you want to set is displayed. • You can configure Alarm as a snooze alarm or a one-time alarm. Alarms and can be used as one-time alarms only. • The snooze alarm repeats every five minutes. 2. After you select an alarm, hold down A until the hour setting of the alarm time starts to flash. This indicates the setting screen. • This operation turns on the alarm automatically. 3. Press C to move the flashing in the sequence shown below to select other settings. Hour Minutes Month Day E-34 Note • Pressing any button stops the alarm tone operation. • Performing any one of the following operations during a 5-minute interval between snooze alarms cancels the current snooze alarm operation. Displaying the Timekeeping Mode setting screen (page E-9) Displaying the Alarm setting screen (page E-34) To test the alarm In the Alarm Mode, hold down D to sound the alarm. E-36 To turn Alarms and on and off • Monthly alarm Set the day, hour and minutes for the alarm time. This type of setting causes the alarm to sound every month at the time you set, on the day you set. E-33 4. While a setting is flashing, use D (+) and B (–) to change it. • To set an alarm that does not include a month (daily alarm, monthly alarm), set for the month. Use D and B until the mark appears (between 12 and 1) while month setting is flashing. • To set an alarm that does not include a day (daily alarm, 1-month alarm), set for the day. Use D and B until the mark appears (between the end of the month and 1) while the day setting is flashing. • When setting the alarm time using the 12-hour format, take care to set the time correctly as a.m. (A indicator) or p.m. (P indicator). 5. Press A to exit the setting screen. Alarm Operation The alarm sounds at the preset time for about 10 seconds. In the case of the snooze alarm, the alarm operation is performed a total of seven times, every five minutes, until you turn the alarm off or change it to a one-time alarm (page E-37). • Alarm and Hourly Time Signal operations are performed in accordance with the Timekeeping Mode time. E-35 To select the operation of Alarm 1. In the Alarm Mode, use D to select Alarm . 2. Press A to cycle through the available settings in the sequence shown below. One-time alarm on Snooze alarm on Alarm off • The applicable alarm on indicator is displayed in all modes when an alarm is turned on. • The snooze indicator flashes during the 5-minute intervals between alarms. • Displaying the Alarm setting screen (page E-34) while the snooze alarm is turned on turns off the snooze alarm automatically (making Alarm a one-time alarm). E-37 Dual Time Alarm on indicator 1. In the Alarm Mode, use D to select a one-time alarm (alarm number or ). 2. Press A to toggle the displayed alarm on and off. • Turning on a one-time alarm ( or ) displays the alarm on indicator on its screen. • The alarm on indicator is displayed in all modes. • If any alarm is on, the alarm on indicator is shown on the display in all modes. Timekeeping Mode time The Dual Time Mode lets you keep track of time in a different time zone. You can select Standard Time or Daylight Saving Time for the Dual Time. • The seconds count of the Dual Time is synchronized with the seconds count of the Timekeeping Mode. To set the Dual Time 1. Press C to enter the Dual Time Mode (page E-7). To turn the hourly time signal on and off 2. In the Dual Time Mode, hold down A until the DST Hourly time signal on indicator E-38 1. In the Alarm Mode, use D to select the Hourly Time Signal. 2. Press A to toggle the displayed item on and off. • Turning on the Hourly Time Signal displays the hourly time signal on indicator on its screen. • The hourly time signal on indicator is displayed in all modes. Dual time (Hour : Minutes Seconds) setting starts to flash, which indicates the setting screen. 3. Press C to move the flashing in the sequence shown below to select the other setttings. DST Hour Minutes E-39 Operation Guide 5510 4. When the setting you want to change is flashing, use B and D to change it as described below. Screen: To do this: Do this: lllllll ll ll ll ll Toggle between Daylight Saving Time Illumination An LED (light-emitting diode) illuminates the face of the watch for easy reading in the dark. The watch's auto light switch turns on illumination automatically when you angle the watch towards your face. ( ) and Standard Time ( ) Press D. Change the hour or minutes Use D (+) and B (–). 5. Press A to exit the setting screen. • The DST indicator on the Dual Time Mode screen indicates that DST is turned on for the Dual Time Mode time. E-40 llllllll l Auto light switch on indicator • The auto light switch must be turned on (indicated by the auto light switch on indicator) for it to operate. • See "Illumination Precautions" on page E-48 for other important information about using illumination. To illuminate the display manually In any mode (except when a setting screen is on the display), press B to illuminate the face of the watch. • The above operation turns on illumination regardless of the current auto light switch setting. E-41 • You can use the procedure below to select either 1.5 seconds or 3 seconds as the illumination duration. When you press B, the illumination will remain on for about 1.5 seconds or 3 seconds, depending on the current illumination duration setting. To specify the illumination duration 1. In the Timekeeping Mode, hold down A until the seconds start to flash, which indicates the setting screen. About the Auto Light Switch Turning on the auto light switch causes illumination to turn on, whenever you position your wrist as described below in any mode. Moving the watch to a position that is parallel to the ground and then tilting it towards you more than 40 degrees causes illumination to turn on. • Wear the watch on the outside of your wrist. ll lll ll 2. While the seconds are flashing, press B to toggle the ll ll Parallel to ground More than 40° E-42 illumination duration between 1.5 seconds ( ) and 3 seconds ( ). 3. Press A to exit the setting screen. E-43 Warning! • Always make sure you are in a safe place whenever you are reading the display of the watch using the auto light switch. Be especially careful when running or engaged in any other activity that can result in accident or injury. Also take care that sudden illumination by the auto light switch does not startle or distract others around you. • When you are wearing the watch, make sure that its auto light switch is turned off before riding a bicycle or operating a motorcycle or any other motor vehicle. Sudden and unintended operation of the auto light switch can create a distraction, which can result in a traffic accident and serious personal injury. To turn the auto light switch on and off In the Timekeeping Mode, hold down B for about three seconds to toggle the auto light switch on (auto light switch on indicator (LT) displayed) and off (auto light switch on indicator (LT) not displayed). • The auto light switch on indicator (LT) remains in all modes while the auto light switch is turned on. • In order to protect against running down the battery, the auto light switch will turn off automatically approximately six hours after you turn it on. Repeat the above procedure to turn the auto light switch back on if you want. E-44 Button Operation Tone The button operation tone sounds any time you press one of the watch's buttons. You can turn the button operation tone on or off as desired. • The multi-function alarms and Countdown Timer Mode Reference This section contains more detailed and technical information about watch operation. It also contains important precautions and notes about the various features and functions of this watch. Auto Return Feature • If you leave a screen with flashing digits on the display for two or three minutes without performing any operation, the watch saves any settings you have made up to that point and exits the setting screen automatically. • The watch will change to the Timekeeping Mode automatically if you do not perform any operation in the Recall Mode, Alarm Mode, or Hand Setting Mode for two or three minutes. E-45 Scrolling The B and D buttons are used in various modes and setting screens to scroll through data on the display. In most cases, holding down these buttons during a scroll operation scrolls through the data at high speed. Timekeeping Mute indicator alarm will sound even if the button operation tone is turned off. • Resetting the seconds to while the current count is in the range of 30 to 59 To turn the button operation tone on and off In any mode (except when a setting screen is on the display), hold down C to toggle the button operation tone on (mute indicator not displayed) and off (mute indicator displayed). • Holding down C to turn the button operation tone on or off also causes the watch's current mode to change. • The mute indicator is displayed in all modes when the button operation tone is turned off. E-46 Illumination Precautions • Illumination may be hard to see when viewed under direct sunlight. • Illumination turns off automatically whenever an alarm sounds. • Frequent use of illumination runs down the battery. causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are reset to without changing the minutes. • The year can be set in the range of 2000 to 2099. • The watch's built-in full automatic calendar makes allowances for different month lengths and leap years. Once you set the date, there should be no reason to change it except after you have the watch's battery replaced. E-47 Auto light switch precautions • Avoid wearing the watch on the inside of your wrist. Doing so causes the auto light switch to operate when it is not needed, which shortens battery life. If you want to wear the watch on the inside of your wrist, turn off the auto light switch feature. More than 15 degrees too high E-48 • Illumination may not turn on if the face of the watch is more than 15 degrees above or below parallel. Make sure that the back of your hand is parallel to the ground. • Illumination turns off in about 1.5 seconds or 3 seconds, even if you keep the watch pointed towards your face. E-49 Operation Guide 5510 • Static electricity or magnetic force can interfere with proper operation of the auto light switch. If illumination does not turn on, try moving the watch back to the starting position (parallel with the ground) and then tilt it back toward you again. If this does not work, drop your arm all the way down so it hangs at your side, and then bring it back up again. • Under certain conditions, illumination may not turn on until about one second after you turn the face of the watch towards you. This does not necessarily indicate malfunction of the auto light switch. • You may notice a very faint clicking sound coming from the watch when it is shaken back and forth. This sound is caused by mechanical operation of the auto light switch, and does not indicate a problem with the watch. E-50 Memory Capacity: 60 records (used for lap times and split times) Other: Lap/split numbers Countdown Timer: Measuring unit: one second Input range: one minute to 24 hours (1-minute increments and 1-hour increments) Other: Auto-repeat timing Alarms: 3 Multi-function*alarms (Two one-time alarms; one snooze/one-time alarm); Hourly Time Signal *Alarm type: Daily alarm, Date alarm, 1-month alarm, Monthly alarm Dual Time: Hour, minutes, seconds, a.m. (A)/p.m. (P) Other: Daylight Saving Time (summer time)/Standard Time Illumination: LED (light-emitting diode); Auto Light Switch; selectable illumination duration (approximately 1.5 seconds or 3 seconds) Other: Button operation tone on/off E-52 Specifications Accuracy at normal temperature: ± 30 seconds a month Digital Timekeeping: Hour, minutes, seconds, a.m. (A)/ p.m. (P), month, day, day of the week Time format: 12-hour and 24-hour Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099 Other: Daylight Saving Time (summer time)/Standard Time Analog Timekeeping: Hour, minutes (hand moves every 20 seconds) Stopwatch: Measurement Capacity: 99 hours, 59 minutes, 59 seconds Measurement Units: Depends on range. Lap Times: 1/100 second from 00:00 00 to 00:59 59.99; 1 second from 1:00 00 to 99:59 59 Split Times: 1/100 second from 00:00 00 to 09:59 59.99; 1 second from 10:00 00 to 99:59 59 Measurement Types: Elapsed time, lap times, split times E-51 Battery: One lithium battery (Type: CR1220) Approximate Battery Life: 3 years on type CR1220 (10 seconds of alarm operation per day, one illumination operation (1.5 seconds) per day) Frequent use of the light shortens the battery life. Specifications are subject to change without notice. E-53
Hướng dẫn sử dụng Đồng hồ Nữ Baby-G BGA-240-1A3DR, mẫu mã mới
Download!
MO1612-EA © 2016 CASIO COMPUTER CO., LTD. Operation Guide 5510 About This Manual • Button operations are indicated using the letters shown in the illustration. • Depending on the model of your watch, display text appears either as dark figures on a light background, or light figures on a dark background. All sample displays in this manual are shown using dark figures on a light background. • Note that the product illustrations in this manual are intended for reference only, and so the actual product may appear somewhat different than depicted by an illustration. E-1 • Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be found in the "Reference" section. E-2 Recall Mode ……………………………………………………………………………E-24 To recall stopwatch time records………………………………………………E-25 To delete a log …………………………………………………………………E-27 Countdown Timer………………………………………………………………………E-28 To use the countdown timer ……………………………………………………E-29 To configure countdown start time and auto-repeat settings ………………E-30 Alarms ……………………………………………………………………………………E-32 To set an alarm time ……………………………………………………………E-34 To test the alarm ………………………………………………………………E-36 To select the operation of Alarm ……………………………………………E-37 To turn Alarms and on and off ……………………………………………E-38 To turn the hourly time signal on and off ……………………………………E-38 Dual Time ………………………………………………………………………………E-39 To set the Dual Time ……………………………………………………………E-39 E-4 General Guide • Press C to change from mode to mode. • In any mode (except when a setting screen is on the display), press B to illuminate the face of the watch. Contents General Guide ………………………………………………………………………… E-6 Timekeeping …………………………………………………………………………… E-8 To set the digital time and date ……………………………………………… E-9 To toggle between 12-hour and 24-hour timekeeping ………………………E-11 To toggle the Timekeeping Mode digital time between DST and Standard Time ………………………………………………………………E-12 To adjust the analog time ………………………………………………………E-13 Stopwatch ………………………………………………………………………………E-15 To measure elapsed time ………………………………………………………E-18 To measure elapsed time with lap times ……………………………………E-19 To measure elapsed time with split times ……………………………………E-20 E-3 Illumination ……………………………………………………………………………E-41 To illuminate the display manually ……………………………………………E-41 To specify the illumination duration……………………………………………E-42 To turn the auto light switch on and off ………………………………………E-44 Reference ………………………………………………………………………………E-45 To turn the button operation tone on and off …………………………………E-46 Specifications …………………………………………………………………………E-51 E-5 Countdown Timer Stopwatch Mode Timekeeping Mode C C Recall Mode C C Mode C C E-6 Hand Setting Mode C Dual Time Mode Alarm Mode E-7 Timekeeping Day of week Use the Timekeeping Mode to set and view the current time and date. This watch features separate digital and To set the digital time and date 1. In the Timekeeping Mode, hold down A until the seconds start to flash, which indicates the setting screen. Month – Day analog timekeeping. The procedures for setting the digital ll lll lll 2. Press C to move the flashing in the sequence shown time (page E-9) and analog time (page E-13) are different. ll ll below to select other settings. Minutes Hours PM indicator Seconds E-8 Setting the Digital Time and Date Use the Timekeeping Mode to set and view a digital display of the current time and date. When setting the digital time, you also can configure settings for the summer time (Daylight Saving Time or DST). Seconds Seconds Day DST Hour Month Minutes Year E-9 Operation Guide 5510 3. When the setting you want to change is flashing, use D and B to change it as described below. To do this: Screen: Do this: 4. Press A to exit the setting screen. • The day of the week is displayed automatically in accordance with the date (year, month, and day) settings. • See "Daylight Saving Time (DST) Setting" below for details about the DST setting. E-10 Reset the seconds to Press D. Toggle between Daylight Saving Time ( ) and Standard Time ( ) Press D. Change the hour or minute Change the year, month, or day Use D (+) and B (–). Use D (+) and B (–). To toggle between 12-hour and 24-hour timekeeping In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and 24-hour timekeeping. • With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for times in the range of noon to 11:59 p.m. and the A (AM) indicator appears to the left of the hour digits for times in the range of midnight to 11:59 a.m. • With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without any indicator. • The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is applied in all other modes. • The A and P indicators are not displayed with the Timekeeping Mode time on the Countdown Timer Mode and Dual Time Mode screens. E-11 Daylight Saving Time (DST) Setting Daylight Saving Time (summer time) advances the time setting by one hour from Standard Time. Remember that not all countries or even local areas use Daylight Saving Time. To toggle the Timekeeping Mode digital time between DST and Standard Time 1. In the Timekeeping Mode, hold down A until the Setting the Analog Time Perform the procedure below when the time indicated by the analog hands does not match the time of the digital display. To adjust the analog time 1. In the Timekeeping Mode, press C six times to enter DST indicator ll lll lll lllllllll ll l seconds start to flash, which indicates the setting screen. 2. Press C once and the DST setting screen appears. 3. Press D to toggle between Daylight Saving Time ( displayed) and Standard Time ( displayed). lllll llll lllll the Hand Setting Mode (page E-6). 2. Hold down A until the current digital time starts to flash, which indicates the setting screen. 3. Use D to adjust the analog setting. • Press D once to advance the hands 20 seconds. • Hold down D to advance the hands at high speed. On/Off status E-12 4. Press A to exit the setting screen. • The DST indicator appears on the Timekeeping, Alarm, and Hand Setting Mode screens to indicate that Daylight Saving Time is turned on. • To lock high speed hands movement, hold down D to start it and then press B to lock. The hands will continue to advance for one 12-hour cycle or until you press any button to stop them. E-13 • High-speed hand movement will stop automatically after the time advances 12 hours or if an alarm (daily alarm, Hourly Time Signal, or countdown beeper) starts to sound. 4. Press A to exit the setting screen. • The minute hand will be adjusted slightly to match the seconds when you exit the setting screen. • To return to the Timekeeping Mode, press C. Stopwatch Remaining free records The stopwatch lets you measure elapsed time, lap times, and split times. Lap times and split times can be stored in memory. • The display range of the stopwatch is 99 hours, 59 minutes, 59 seconds. • All of the operations in this section are performed in the Stopwatch Mode, which you enter by pressing C (page E-6). Note Hours Minutes 1/100 second • "Lap time" is the time spent to cover a specific segment of a race, such as one lap around a track. "Split time" is the time spent from the beginning of a race up to a Seconds E-14 certain point. • The stopwatch continues to run, restarting from zero after it reaches its limit, until you stop it. E-15 • The stopwatch measurement operation continues even if you exit the Stopwatch Mode. • For information about how stopwatch times are stored in memory, see "Memory Management" (page E-22). Viewing the Stopwatch Digital Displays The information that appears in the watch's upper and lower digital displays depends on whether you are measuring lap times or split times. Lap Time Measurement Upper Display: Lap time Lower Display: Elapsed time Split Time Measurement Upper Display: Lap time Lower Display: Elapsed time (Split time appears here for eight seconds as it is stored in memory.) E-16 • See "To measure elapsed time with lap times" (page E-19) and "To measure elapsed time with split times" (page E-20) for more information about each type of measurement. • You can perform elapsed time measurement starting from either the lap time screen or the split time screen (page E-19 and E-20). Whenever you enter the Stopwatch Mode, the screen (lap time or split time) that was displayed when you last exited the mode will appear first. • During a stopwatch elapsed time operation, the upper display initially shows minutes, seconds, and a 1/100-second value. This changes to hours, minutes, and seconds when the time in the upper display exceeds 60 minutes. • The lower display initially shows hours, minutes, seconds, and a 1/100-second value. This changes to hours, minutes, and seconds when the time in the lower display exceeds 10 hours. E-17 Seconds Minutes To measure elapsed time with lap times Minutes 1/100 second Hours More than one hour Seconds 1. When the stopwatch display shows all zeros, press A to display the lap time screen (indicated by /LAP). 2. Press D to start an elapsed time measurement. Seconds Minutes 1/100 second HoursMinutesSeconds • At the time, both the upper and lower displays will show identical times. Hours More than 10 hours Lap time llllllll lllllll l 3. Press A to record the time of the first lap. • This freezes the current lap time in the upper part of the digital display for about eight seconds, while To measure elapsed time Note • You can perform the following steps starting from either the lap time screen or the split time screen. 1. Press D to start the stopwatch. 2. Press D again to stop the stopwatch. • You can resume the measurement operation by pressing D. 3. Press A to clear the stopwatch to all zeros. E-18 llllllll lllllll l Elapsed time measurement of total elapsed time and the next lap time continue internally. The lap number of the displayed time appears in the lower digital display. • After eight seconds, the ongoing elapsed time measurement re-appears in the lower digital display. 4. Repeat step 3 to record more lap times. 5. Press D to stop the stopwatch. E-19 Operation Guide 5510 Lap time llllllll lllllll l 6. Press A to clear the stopwatch to all zeros. • Lap numbers are incremented automatically starting Split Time Recording (Displayed for eight 3. Press A to record the time of the first split. • The current split time appears in the lower display for from 1 whenever you press A in step 3 of the above procedure. The maximum lap number is 99. Recording a lap after that causes the lap number count to restart from 00. Lap number seconds after A is pressed.) Split number llllllll lllllll l about eight seconds, as the total elapsed time, next lap time, and next split time continue to be timed internally by the watch. The split number of the displayed time appears in the upper display. • After eight seconds, the ongoing lap time measurement appears in the upper display and the ongoing elapsed time measurement appears in the To measure elapsed time with split times lower display. Lap time llllllll lllllll l 1. When the stopwatch display shows all zeros, press A to display the split time screen (indicated by /SPL). Split time 4. Repeat step 3 to record more split times. 5. Press D to stop the stopwatch. llllllll lllllll l Elapsed time E-20 2. Press D to start an elapsed time measurement. • At the time, both the upper and lower displays will show identical times. 6. Press A to clear the stopwatch to all zeros. • Split numbers are incremented automatically starting from 1 whenever you press A in step 3 of the above procedure. The maximum split number is 99. Recording a split time after that causes the split number count to restart from 00. E-21 Memory Management A new log is created each time you press D in the Stopwatch Mode to start a new elapsed time measurement operation. A log contains a log title screen, and records of all the lap or split times you record during the current elapsed time measurement operation. • The capacity of the watch's memory is 60 records. • If you are adding records to the only log in memory and watch memory becomes full, adding another record causes the oldest record in the log to be deleted automatically to make room for the new record. • If you are adding records to a log when there are multiple logs in memory and watch memory becomes full, adding another record causes the oldest log in How stopwatch data is stored The following table shows how stopwatch data is stored when you perform stopwatch button operations. Stopwatch Button Operation Data Storage Description From all-zeros, press D to start. Creates a new log. Stores the date the button was pressed, and the new log number. Press A to display lap/split time.Creates a new record with each button operation. Stores the lap and split times and total elapsed time at each point the button is pressed. memory and all of its records to be deleted automatically to make room for new records. Press D to stop elapsed time measurrement and then press A to reset. Resets the elapsed time to all zeros without recording data. E-22 Recall Mode Day of week Month – Day Log number Log Title Screen E-24 Log Title Screen Use the Recall Mode to recall and delete logs and records you stored in the Stopwatch Mode. You can use the Recall Mode to view both lap and split time records. • When you enter the Recall Mode, the newest log recorded in the Stopwatch Mode will appear first. If there are no logs in memory, appears on the display. • You can use the Recall Mode to check memory data even while a stopwatch elapsed time measurement operation is in progress. However, the time data that is currently being measured will not appear in the Recall Mode. • You can convert a lap time saved in the Stopwatch Mode to a split time (page E-25). First record Last record Lap time Lap number Press D. Split number • See "Recall Mode" (page E-24) for details on how to recall time records from memory. E-23 To recall stopwatch time records 1. In the Stopwatch Mode, check to make sure that the displays are reset to all zeros (page E-19). • If all zeros are not displayed, reset the stopwatch. 2. Use the A button to select either the lap time screen (to view lap time records) or the split time screen (to view split time records) (page E-19 and E-20). • To convert a lap time saved in the Stopwatch Mode to a split time, select the split time screen. 3. Press the C button to enter the Recall Mode. 4. Use the A button to scroll through the log title screens from the newest to the oldest until the title screen of the log whose records you want to view is displayed. 5. Press D to scroll through the records contained in the log you selected in step 4, from the oldest to the newest. E-25 To delete a log 1. In the Recall Mode, display the title screen of the log you want to delete. 2. Hold down B and D until stops flashing on the display. • This deletes the log and all the records inside it. • Deleting a single log slides all newer logs (ones with higher log numbers) upwards to fill the empty space. This cause the log numbers of all the newer logs to be reduced by 1. If there are six logs currently in memory (numbered 01 through 06) and you delete log 03, the numbers of logs that previously were numbered 04, 05, and 06 will change to 03, 04, and 05. Log number Split time • Whether you will be able to view lap time records or split time records will depend on the screen you selected in step 2, above. E-26 Countdown Timer E-27 To use the countdown timer Press D while in the Countdown Timer Mode to start the countdown timer. Timekeeping Mode time Hours Seconds Minutes Auto-repeat on indicator E-28 You can set the countdown timer within a range of one minute to 24 hours. An alarm sounds when the countdown reaches zero. • You also can select auto-repeat, which automatically restarts the countdown from the original value you set whenever zero is reached. • All of the operations in this section are performed in the Countdown Timer Mode, which you enter by pressing C (page E-7). • When the end of the countdown is reached and auto-repeat is turned off, the alarm sounds for 10 seconds or until you stop it by pressing any button. The countdown time is reset automatically to its starting value after the alarm stops. • When auto-repeat is turned on, the countdown will restart automatically without pausing when it reaches zero. The alarm sounds when the countdown reaches zero. • The countdown timer measurement operation continues even if you exit the Countdown Timer Mode. • Press D while a countdown operation is in progress to pause it. Press D again to resume the countdown. • To stop a countdown operation completely, first pause it (by pressing D), and then press A. This returns the countdown time to its starting value. E-29 Operation Guide 5510 To configure countdown start time and auto-repeat settings 1. While the countdown start time is on the display in the Countdown Timer Mode, hold down A until the hour setting of the countdown start time starts to flash, which 3. Perform the following operations, depending on which setting currently is selected on the display. • While the start time setting is flashing, use D (+) and B (–) to change it. • Set to specify 24 hours. l ll indicates the setting screen. • If the countdown start time is not displayed, use the • While the auto-repeat on/off setting ( or ) is flashing on the display, press D to toggle auto-repeat on ( ) and off ( ). lll ll ll On/Off status procedure under "To use the countdown timer" (page E-29) to display it. 2. Press C to move the flashing in the sequence shown 4. Press A to exit the setting screen. • The auto-repeat on indicator ( ) is displayed on the Countdown Timer Mode screen while this function is turned on. Auto-repeat below, and select the setting you want to change. • Frequent use of auto-repeat and the alarm can run down battery power. on indicator E-30 Alarms Start Time (Hours) Start Time (Minutes) Auto-Repeat On/Off Alarm Types E-31 Alarm date (Month – Day) Alarm number You can set up to three independent multi-function alarms with hour, minutes, month, and day. When an alarm is turned on, the alarm tone sounds when the alarm time is reached. One of the alarms can be configured as a snooze alarm or a one-time alarm, while the other two are one-time alarms. You also can turn on an Hourly Time Signal that causes the watch to beep twice every hour on the hour. • There are three alarm screens numbered through . The hourly time signal screen is indicated by . • All of the operations in this section are performed in the The alarm type is determined by the settings you make, as described below. • Daily alarm Set the hour and minutes for the alarm time. This type of setting causes the alarm to sound everyday at the time you set. • Date alarm Set the month, day, hour and minutes for the alarm time. This type of setting causes the alarm to sound at the specific time, on the specific date you set. • 1-Month alarm Set the month, hour and minutes for the alarm time. This type of setting causes the alarm to sound everyday at time you set, only during the month you set. Alarm Mode, which you enter by pressing C (page E-7). Alarm time (Hour : Minutes) E-32 To set an alarm time 1. In the Alarm Mode, use D to scroll through the alarm screens until the one whose time you want to set is displayed. • You can configure Alarm as a snooze alarm or a one-time alarm. Alarms and can be used as one-time alarms only. • The snooze alarm repeats every five minutes. 2. After you select an alarm, hold down A until the hour setting of the alarm time starts to flash. This indicates the setting screen. • This operation turns on the alarm automatically. 3. Press C to move the flashing in the sequence shown below to select other settings. Hour Minutes Month Day E-34 Note • Pressing any button stops the alarm tone operation. • Performing any one of the following operations during a 5-minute interval between snooze alarms cancels the current snooze alarm operation. Displaying the Timekeeping Mode setting screen (page E-9) Displaying the Alarm setting screen (page E-34) To test the alarm In the Alarm Mode, hold down D to sound the alarm. E-36 To turn Alarms and on and off • Monthly alarm Set the day, hour and minutes for the alarm time. This type of setting causes the alarm to sound every month at the time you set, on the day you set. E-33 4. While a setting is flashing, use D (+) and B (–) to change it. • To set an alarm that does not include a month (daily alarm, monthly alarm), set for the month. Use D and B until the mark appears (between 12 and 1) while month setting is flashing. • To set an alarm that does not include a day (daily alarm, 1-month alarm), set for the day. Use D and B until the mark appears (between the end of the month and 1) while the day setting is flashing. • When setting the alarm time using the 12-hour format, take care to set the time correctly as a.m. (A indicator) or p.m. (P indicator). 5. Press A to exit the setting screen. Alarm Operation The alarm sounds at the preset time for about 10 seconds. In the case of the snooze alarm, the alarm operation is performed a total of seven times, every five minutes, until you turn the alarm off or change it to a one-time alarm (page E-37). • Alarm and Hourly Time Signal operations are performed in accordance with the Timekeeping Mode time. E-35 To select the operation of Alarm 1. In the Alarm Mode, use D to select Alarm . 2. Press A to cycle through the available settings in the sequence shown below. One-time alarm on Snooze alarm on Alarm off • The applicable alarm on indicator is displayed in all modes when an alarm is turned on. • The snooze indicator flashes during the 5-minute intervals between alarms. • Displaying the Alarm setting screen (page E-34) while the snooze alarm is turned on turns off the snooze alarm automatically (making Alarm a one-time alarm). E-37 Dual Time Alarm on indicator 1. In the Alarm Mode, use D to select a one-time alarm (alarm number or ). 2. Press A to toggle the displayed alarm on and off. • Turning on a one-time alarm ( or ) displays the alarm on indicator on its screen. • The alarm on indicator is displayed in all modes. • If any alarm is on, the alarm on indicator is shown on the display in all modes. Timekeeping Mode time The Dual Time Mode lets you keep track of time in a different time zone. You can select Standard Time or Daylight Saving Time for the Dual Time. • The seconds count of the Dual Time is synchronized with the seconds count of the Timekeeping Mode. To set the Dual Time 1. Press C to enter the Dual Time Mode (page E-7). To turn the hourly time signal on and off 2. In the Dual Time Mode, hold down A until the DST Hourly time signal on indicator E-38 1. In the Alarm Mode, use D to select the Hourly Time Signal. 2. Press A to toggle the displayed item on and off. • Turning on the Hourly Time Signal displays the hourly time signal on indicator on its screen. • The hourly time signal on indicator is displayed in all modes. Dual time (Hour : Minutes Seconds) setting starts to flash, which indicates the setting screen. 3. Press C to move the flashing in the sequence shown below to select the other setttings. DST Hour Minutes E-39 Operation Guide 5510 4. When the setting you want to change is flashing, use B and D to change it as described below. Screen: To do this: Do this: lllllll ll ll ll ll Toggle between Daylight Saving Time Illumination An LED (light-emitting diode) illuminates the face of the watch for easy reading in the dark. The watch's auto light switch turns on illumination automatically when you angle the watch towards your face. ( ) and Standard Time ( ) Press D. Change the hour or minutes Use D (+) and B (–). 5. Press A to exit the setting screen. • The DST indicator on the Dual Time Mode screen indicates that DST is turned on for the Dual Time Mode time. E-40 llllllll l Auto light switch on indicator • The auto light switch must be turned on (indicated by the auto light switch on indicator) for it to operate. • See "Illumination Precautions" on page E-48 for other important information about using illumination. To illuminate the display manually In any mode (except when a setting screen is on the display), press B to illuminate the face of the watch. • The above operation turns on illumination regardless of the current auto light switch setting. E-41 • You can use the procedure below to select either 1.5 seconds or 3 seconds as the illumination duration. When you press B, the illumination will remain on for about 1.5 seconds or 3 seconds, depending on the current illumination duration setting. To specify the illumination duration 1. In the Timekeeping Mode, hold down A until the seconds start to flash, which indicates the setting screen. About the Auto Light Switch Turning on the auto light switch causes illumination to turn on, whenever you position your wrist as described below in any mode. Moving the watch to a position that is parallel to the ground and then tilting it towards you more than 40 degrees causes illumination to turn on. • Wear the watch on the outside of your wrist. ll lll ll 2. While the seconds are flashing, press B to toggle the ll ll Parallel to ground More than 40° E-42 illumination duration between 1.5 seconds ( ) and 3 seconds ( ). 3. Press A to exit the setting screen. E-43 Warning! • Always make sure you are in a safe place whenever you are reading the display of the watch using the auto light switch. Be especially careful when running or engaged in any other activity that can result in accident or injury. Also take care that sudden illumination by the auto light switch does not startle or distract others around you. • When you are wearing the watch, make sure that its auto light switch is turned off before riding a bicycle or operating a motorcycle or any other motor vehicle. Sudden and unintended operation of the auto light switch can create a distraction, which can result in a traffic accident and serious personal injury. To turn the auto light switch on and off In the Timekeeping Mode, hold down B for about three seconds to toggle the auto light switch on (auto light switch on indicator (LT) displayed) and off (auto light switch on indicator (LT) not displayed). • The auto light switch on indicator (LT) remains in all modes while the auto light switch is turned on. • In order to protect against running down the battery, the auto light switch will turn off automatically approximately six hours after you turn it on. Repeat the above procedure to turn the auto light switch back on if you want. E-44 Button Operation Tone The button operation tone sounds any time you press one of the watch's buttons. You can turn the button operation tone on or off as desired. • The multi-function alarms and Countdown Timer Mode Reference This section contains more detailed and technical information about watch operation. It also contains important precautions and notes about the various features and functions of this watch. Auto Return Feature • If you leave a screen with flashing digits on the display for two or three minutes without performing any operation, the watch saves any settings you have made up to that point and exits the setting screen automatically. • The watch will change to the Timekeeping Mode automatically if you do not perform any operation in the Recall Mode, Alarm Mode, or Hand Setting Mode for two or three minutes. E-45 Scrolling The B and D buttons are used in various modes and setting screens to scroll through data on the display. In most cases, holding down these buttons during a scroll operation scrolls through the data at high speed. Timekeeping Mute indicator alarm will sound even if the button operation tone is turned off. • Resetting the seconds to while the current count is in the range of 30 to 59 To turn the button operation tone on and off In any mode (except when a setting screen is on the display), hold down C to toggle the button operation tone on (mute indicator not displayed) and off (mute indicator displayed). • Holding down C to turn the button operation tone on or off also causes the watch's current mode to change. • The mute indicator is displayed in all modes when the button operation tone is turned off. E-46 Illumination Precautions • Illumination may be hard to see when viewed under direct sunlight. • Illumination turns off automatically whenever an alarm sounds. • Frequent use of illumination runs down the battery. causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are reset to without changing the minutes. • The year can be set in the range of 2000 to 2099. • The watch's built-in full automatic calendar makes allowances for different month lengths and leap years. Once you set the date, there should be no reason to change it except after you have the watch's battery replaced. E-47 Auto light switch precautions • Avoid wearing the watch on the inside of your wrist. Doing so causes the auto light switch to operate when it is not needed, which shortens battery life. If you want to wear the watch on the inside of your wrist, turn off the auto light switch feature. More than 15 degrees too high E-48 • Illumination may not turn on if the face of the watch is more than 15 degrees above or below parallel. Make sure that the back of your hand is parallel to the ground. • Illumination turns off in about 1.5 seconds or 3 seconds, even if you keep the watch pointed towards your face. E-49 Operation Guide 5510 • Static electricity or magnetic force can interfere with proper operation of the auto light switch. If illumination does not turn on, try moving the watch back to the starting position (parallel with the ground) and then tilt it back toward you again. If this does not work, drop your arm all the way down so it hangs at your side, and then bring it back up again. • Under certain conditions, illumination may not turn on until about one second after you turn the face of the watch towards you. This does not necessarily indicate malfunction of the auto light switch. • You may notice a very faint clicking sound coming from the watch when it is shaken back and forth. This sound is caused by mechanical operation of the auto light switch, and does not indicate a problem with the watch. E-50 Memory Capacity: 60 records (used for lap times and split times) Other: Lap/split numbers Countdown Timer: Measuring unit: one second Input range: one minute to 24 hours (1-minute increments and 1-hour increments) Other: Auto-repeat timing Alarms: 3 Multi-function*alarms (Two one-time alarms; one snooze/one-time alarm); Hourly Time Signal *Alarm type: Daily alarm, Date alarm, 1-month alarm, Monthly alarm Dual Time: Hour, minutes, seconds, a.m. (A)/p.m. (P) Other: Daylight Saving Time (summer time)/Standard Time Illumination: LED (light-emitting diode); Auto Light Switch; selectable illumination duration (approximately 1.5 seconds or 3 seconds) Other: Button operation tone on/off E-52 Specifications Accuracy at normal temperature: ± 30 seconds a month Digital Timekeeping: Hour, minutes, seconds, a.m. (A)/ p.m. (P), month, day, day of the week Time format: 12-hour and 24-hour Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099 Other: Daylight Saving Time (summer time)/Standard Time Analog Timekeeping: Hour, minutes (hand moves every 20 seconds) Stopwatch: Measurement Capacity: 99 hours, 59 minutes, 59 seconds Measurement Units: Depends on range. Lap Times: 1/100 second from 00:00 00 to 00:59 59.99; 1 second from 1:00 00 to 99:59 59 Split Times: 1/100 second from 00:00 00 to 09:59 59.99; 1 second from 10:00 00 to 99:59 59 Measurement Types: Elapsed time, lap times, split times E-51 Battery: One lithium battery (Type: CR1220) Approximate Battery Life: 3 years on type CR1220 (10 seconds of alarm operation per day, one illumination operation (1.5 seconds) per day) Frequent use of the light shortens the battery life. Specifications are subject to change without notice. E-53
Hướng dẫn sử dụng Đồng hồ Nữ Baby-G BGA-230-7BDR, mẫu mã mới
Download!
MA1608-EA © 2015 CASIO COMPUTER CO., LTD. Operation Guide 5382/5465/5508 Congratulations upon your selection of this CASIO watch. ENGLISH About This Manual ξ The operational procedures for Modules 5382, 5465 and 5508 are identical. All of the illustrations in this manual show Module 5382. ξ Depending on the model of your watch, display text appears either as dark fi gures on a light background, or light fi gures on a dark background. All sample displays in this manual are shown using dark fi gures on a light background. ξ Button operations are indicated using the letters shown in the illustration. ξ Note that the product illustrations in this manual are intended for reference only, and so the actual product may appear somewhat different than depicted by an illustration. E-2 Things to check before using the watch 1. Check the Home City and the daylight saving time (DST) setting. Use the procedure under "To confi gure Home City settings" (page E-17) to confi gure your Home City and daylight saving time settings. Important! ξ Proper World Time Mode data depend on correct Home City, time, and date settings in the Timekeeping Mode. Make sure you configure these settings correctly. 2. Set the current time. ξ See "Adjusting the Current Time and Date Settings" (page E-20). The watch is now ready for use. E-4 Adjusting the Current Time and Date Settings . . . . . . . . . . . . . . . . . . . . . . . . E-20 To confi gure the digital time and date settings . . . . . . . . . . . . . . . . . . . . . . . . E-20 Checking the Current Time in a Different Time Zone . . . . . . . . . . . . . . . . . . . E-24 To enter the World Time Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-25 To view the time in another time zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-25 To specify standard time or daylight saving time (DST) for a city . . . . . . . . . . . E-26 Using the Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-27 To enter the Stopwatch Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-27 To perform an elapsed time operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-28 To pause at a split time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-28 To measure two fi nishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-28 E-6 Adjusting Hand Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-38 To adjust hand positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-38 Button Operation Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-40 To turn the button operation tone on and off . . . . . . . . . . . . . . . . . . . . . . . . . E-40 To ensure that this watch provides you with the years of service for which it is designed, carefully read and follow the instructions in this manual, especially the information under "Operating Precautions" and "User Maintenance". Be sure to keep all user documentation handy for future reference. E-1 Module 5382 Module 5465 Module 5508 E-3 Contents About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-2 Things to check before using the watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-4 Mode Reference Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-9 Timekeeping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-15 To swap your Home City and World Time City . . . . . . . . . . . . . . . . . . . . . . . . E-16 Confi guring Home City Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-17 To confi gure Home City settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-17 To change the Daylight Saving Time (summer time) setting . . . . . . . . . . . . . . E-19 E-5 Countdown Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-30 To enter the Countdown Timer Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-30 To confi gure the countdown timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-31 To perform a countdown timer operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-32 To stop the alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-32 Using the Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-33 To set an alarm time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-33 To test the alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-34 To turn an alarm and the Hourly Time Signal on and off . . . . . . . . . . . . . . . . . E-35 To stop the alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-35 Illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-36 To turn on illumination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-36 To change the Illumination Duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-36 E-7 Mode Reference Guide The mode you should select depends on what you want to do. Enter this mode: All Modes Timekeeping Mode World Time Mode Stopwatch Mode Countdown Timer Mode Alarm Mode To do this: See: ξ View the current time in the Home City Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-42 Main Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-43 Specifi cations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-44 ξ View the current time in one of 48 cities (31 time zones) around the globe ξ View the current date in the Home City ξ Confi gure Home City and daylight saving time (DST) settings ξ Confi gure time and date settings ξ Confi gure World Time City and daylight saving time E-10 E-15 E-17 E-20 Operating Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-46 User Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-57 E-8 (DST) settings E-24 ξ Use the stopwatch to measure elapsed time E-27 ξ Use the countdown timer E-30 ξ Set an alarm time E-33 E-9 Operation Guide 5382/5465/5508 Selecting a Mode ξ Press C to cycle between the modes as shown below. ξ To return to the Timekeeping Mode from any other mode, hold down C for about two seconds. ξ In any mode (except a setting mode), press B to illuminate the display. Home Time : hour and minutes World Time : hour and minutesE-10 General Functions (All Modes) Timekeeping Mode World Time Mode Stopwatch Mode Countdown Timer Mode Alarm Mode Moving the Hands Out of the Way for Better Viewing E-11 The functions and operations described in this section can be used in all of the modes. ξ Auto Return Features The watch will automatically return to the Timekeeping Mode if you do not perform any operation for a certain amount of time, as described below. Mode Approximate Elapsed Time Alarm Time or other setting mode 2 to 3 minutes (information fl ashing on the display) ξ Scrolling The B and D buttons are used on the setting mode to scroll through data on the display. In most cases, holding down these buttons during a scroll operation scrolls through the data at high speed. E-12 2. Holding down B again as you press C will cause the hands to return to their normal positions (normal timekeeping). You can use the procedure below to temporarily move the hour and minute hands out of the way to better view what is on the display. 1. While holding down B, press C. ξ This will cause the hour and minute hands to move to a location where they do not block your view of the World Time and/or digital display. Modules 5382, 5465 Module 5508 Flashes while the hands are moved out of the way. E-13 Timekeeping Use the Timekeeping Mode to set and view the current time and date. Note ξ This operation can be performed in any mode. In the case of a setting mode (setting fl ashing on the screen), the hands will move out of the way automatically, even if you do not perform the above operation. ξ Watch button functions are the same regardless of whether the hands are move out of the way or at their normal positions. ξ Changing to another mode will cause the hands to move back to their normal positions. ξ The hands also will move back to their normal positions automatically if no operation is performed for about one hour. E-14 Home Time : hour and minutes Home City information World Time : hour and minutes ξ Each press of A cycles the Home City information as shown below. Month-Day Day of the Week Seconds Hour : Minutes A A A PM indicator A E-15 To swap your Home City and World Time City In the Timekeeping Mode, hold down D for about three seconds. This swaps your Home City and World Time City. Example: To swap the Home City (TYO) and World Time City (NYC) Current Home City (TYO) time New Home City (NYC) time Confi guring Home City Settings There are two Home City settings: actually selecting the Home City, and selecting either standard time or daylight saving time (DST). To confi gure Home City settings Current World Time City (NYC) time Current Home City (TYO) information E-16 Hold down D New Home City City Code New World Time City (TYO) time New Home City (NYC) information 1. In the Timekeeping Mode, hold down A until ADJ appears. ξ This indicates the city code setting mode. ξ The hour and minute hands automatically move out of the way at this time (page E-13). 2. Press D (East) and B (West) to select the city code you want to use as your Home City. ξ Keep pressing D or B until the city code you want to select as your Home City appears on the display. ξ For details about city codes, see the "City Code Table" at the back of this manual. E-17 3. After the setting is the way you want, press A to return to the Timekeeping To change the Daylight Saving Time (summer time) setting Mode. Note ξ After you specify a city code, the watch will use UTC* offsets in the World Time Mode to calculate the current time for other time zones based on the current time in your Home City. * Coordinated Universal Time, the world-wide scientifi c standard of timekeeping. The reference point for UTC is Greenwich, England. E-18 DST indicator 1. In the Timekeeping Mode, hold down A until ADJ appears. ξ This indicates the city code setting mode. ξ The hour and minute hands automatically move out of the way at this time (page E-13). 2. Press C to display the DST setting mode. 3. Press D to toggle between Daylight Saving Time (ON) and Standard Time (OFF). ξ Note that you cannot switch between daylight saving time and standard time while UTC is selected as your Home City. 4. After the setting is the way you want, press A to return to the Timekeeping Mode. ξ The DST indicator appears to indicate that Daylight Saving Time is turned on. E-19 Operation Guide 5382/5465/5508 Adjusting the Current Time and Date Settings Use the procedure below to adjust the digital time and date settings. 2. Press C to move the fl ashing in the sequence shown below to select the other settings. Changing the digital time should cause the analog time setting to change City Code (page E-17) C CC accordingly. To confi gure the digital time and date settings 1. In the Timekeeping Mode, hold down A until ADJ C appears. ξ This indicates the city code setting mode. DST (page E-19) 12/24-Hour Format Seconds C Hour C ξ The hour and minute hands automatically move out of the way at this time (page E-13). Illumination Duration (page E-36) Minutes C C Button Operation Tone On/Off (page E-40) Day Month Year CCC E-20 E-21 3. When the timekeeping setting you want to change is fl ashing, use D and/or B to change it as described below. To do this: Toggle between 12-hour (12H) and 24-hour (24H) timekeeping Reset the seconds to 00 Change the hour or minute Change the year Change the month or day Screen Do this: Press D. Press D. Use D (+) and B (–). Use D (+) and B (–). Use D (+) and B (–). 4. Press A to exit the setting mode. E-22 Checking the Current Time in a Different Time Zone You can view the current time in one of 31 time zones (48 cities) around the globe. The city that is currently selected in the World Time Mode is called the "World Time City". There are two World Time City settings: actually selecting the World Time City, and selecting either standard time or daylight saving time (DST). Note ξ Resetting the seconds to 00 while the current count is in the range of 30 to 59 causes the minutes to be increased by 1. ξ The watch's built-in full automatic calendar makes allowances for different month lengths and leap years. Once you set the date, there should be no reason to change it except after you have the watch's battery replaced. ξ The day of the week changes automatically when the date changes. E-23 To enter the World Time Mode Use C to select the World Time Mode as shown on page E-10. ξ The display changes as shown below. A Home Time : hour and minutes Mode name World Time City city code and name will scroll. World Time City city code World Time : hour and minutes PM indicator World Time City E-24 To specify standard time or daylight saving time (DST) for a city ξ Press A to display the city code and name of the currently selected city. To view the time in another time zone Pressing D changes the city code setting. ξ Each press of D advances to the next city code. ξ To change the city code to UTC, press B and D at the same time. Using the Stopwatch E-25 The stopwatch measures elapsed time, split times, and two fi nishes. To enter the Stopwatch Mode Use C to select the Stopwatch Mode as shown on page E-11. Minutes Seconds E-26 DST indicator In the World Time Mode, hold down A for about two seconds. ξ This toggles between Daylight Saving Time (DST indicator displayed) and standard time (DST indicator not displayed). ξ Note that you cannot switch between standard time/ daylight saving time (DST) while UTC is selected as the World Time City. ξ The standard time/daylight saving time (DST) setting affects only the currently displayed city. Other cities are not affected. E-27 To perform an elapsed time operation D D D D A Start Stop Resume Stop Reset To pause at a split time D A A D A Note ξ The Stopwatch Mode can indicate elapsed time up to 59 minutes, 59 seconds. ξ An ongoing elapsed time measurement operation will continue internally even if you change to another mode. However, if you exit the Stopwatch Mode while a split time is displayed, the split time will not be displayed when you return to the Stopwatch Mode. Start Split (SPL displayed) To measure two fi nishes Split release Stop Reset D A D A A Start Split (SPL displayed) First runner fi nishes. Display time of fi rst runner. E-28 Stop Second runner fi nishes. Split release Display time of second runner. Reset E-29 Operation Guide 5382/5465/5508 Countdown Timer The countdown timer can be set within a range of one minute to 60 minutes. An alarm sounds when the countdown reaches zero. To enter the Countdown Timer Mode Use C to select the Countdown Timer Mode as shown on page E-11. Minutes Seconds E-30 To perform a countdown timer operation D D D D A Start Stop Resume Stop Reset ξ Before starting a countdown timer operation, check to make sure that a countdown operation is not in progress (indicated by the seconds counting down). If it is, press D to stop it and then A to reset to the countdown start time. To stop the alarm To confi gure the countdown timer 1. While the countdown start time is on the display in the Countdown Timer Mode, hold down A until the current countdown start time starts to fl ash, which indicates the setting mode. ξ The hour and minute hands automatically move out of the way at this time (page E-13). ξ If the countdown start time is not displayed, use the procedure under "To perform a countdown timer operation" (page E-32) to display it. 2. Use D (+) and B (–) to change the setting. ξ You can set a start time in the range of 1 to 60 minutes in 1-minute increments. 3. Press A to exit the setting mode. E-31 Using the Alarm The watch beeps for about 10 seconds when the alarm time is reached. The hourly time signal causes the watch to beep every hour on the hour. To set an alarm time 1. Use C to select the Alarm Mode as shown on page E-11. ξ This will cause the display to change as shown below. ξ If SIG appears on the display, press D. Press any button. E-32 1 second Mode name Alternates Alarm time ON/OFF E-33 2. Hold down A for about two seconds until the alarm time starts to fl ash. This is the setting mode. ξ The hour and minute hands automatically move out of the way at this time (page E-13). 3. Press C to move the fl ashing between the hour and minute settings. 4. While a setting is fl ashing, use D (+) and B (–) to change it. 5. Press A to exit the setting mode. To turn an alarm and the Hourly Time Signal on and off 1. In the Alarm Mode, use D to select an alarm or the Hourly Time Signal. ξ Each press of D cycles between the alarm time screen and the hourly time signal SIG setting screen. 2. Press A to toggle the displayed setting (alarm or hourly time signal) between on and off. To test the alarm In the Alarm Mode, hold down D to sound the alarm. E-34 D Alarm time screen SIG setting screen To stop the alarm Press any button. A A E-35 Illumination The face of the watch is illuminated for easy reading in the dark. To turn on illumination In any mode (except a setting mode), press B to illuminate the display. Illumination Precautions ξ Illumination may be hard to see when viewed under direct sunlight. ξ Illumination turns off automatically whenever an alarm sounds. ξ Frequent use of illumination runs down the battery. To change the Illumination Duration 1. In the Timekeeping Mode, hold down A until ADJ appears. ξ This indicates the city code setting mode. ξ The hour and minute hands automatically move out of the way at this time (page E-13). E-36 Adjusting Hand Positions Strong magnetism or impact can cause the hands setting to be off. If this happens, you should adjust the hand positions. To adjust hand positions Hour hand and minute hand 2. Press C 10 times to display the illumination duration setting screen (page E-21). The screen will show either LT1 or LT3. 3. Press D to toggle the illumination duration setting between LT1 (1.5 seconds) and LT3 (3 seconds). 4. After all the settings are the way you want, press A to exit the setting screen. E-37 3. Press C. ξ This enters the hour and minute hand adjustment mode. 4. If the hour and minute hands are not at 12 o'clock, use D and B to adjust them until they are. World Time hands E-38 1. In the Timekeeping Mode, hold down A for about fi ve seconds until H.SET appears. ξ This indicates the World Time hands adjustment mode. ξ Though ADJ will appear as you hold down A, do not release the button yet. 2. If the World Time hands are not at 12 o'clock, use D and B to adjust them until they are. 5. Press A to return to the Timekeeping Mode. Check to make sure that the time indicated by the hour and minute hands matches the time on the digital display. If the times don't match, perform the correction procedure above again. E-39 Operation Guide 5382/5465/5508 Button Operation Tone You can turn the button operation tone on or off as desired. ξ Even if you turn off the button operation tone, alarms, the Hourly Time Signal, and other beepers all operate normally. To turn the button operation tone on and off 1. In the Timekeeping Mode, hold down A until ADJ appears. ξ This indicates the city code setting mode. ξ The hour and minute hands automatically move out of the way at this time (page E-13). 2. Press C nine times to display the button operation tone On/Off setting screen (page E-21). The screen will show either KEY or MUTE. E-40 Troubleshooting Time Setting ■ The current time setting is off by hours. 3. Press D to toggle the setting between KEY (ON) and MUTE (OFF). 4. After all the settings are the way you want, press A to exit the setting screen. E-41 Main Indicators Module 5382 Module 5465 Module 5508 1 Your Home City setting may be wrong (page E-17). Check your Home City setting and 1 2 correct it, if necessary. ■ The current time setting is off by one hour. 1 2 You may need to change your Home City's standard time/daylight saving time 3 2 (DST) setting. Use the procedure under "Adjusting the Current Time and Date Settings" (page E-20) to change the standard time/daylight saving time (DST) setting. 3 3 World Time ■ The time for my World Time City is off. This could be due to incorrect switching between standard time and daylight saving time. See "To specify standard time or daylight saving time (DST) for a city" (page E-26) for more information. E-42 Specifi cations Accuracy at normal temperature: ±30 seconds a month Digital Timekeeping: Hour, minutes, seconds, p.m. (P), month, day, day of the week Time format: 12-hour and 24-hour Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099 Name PM indicator DST indicator Hands shifted indicator Number See 1 E-15 2 E-19, E-26 3 E-13 Countdown Timer: Measuring unit: 1 second Countdown range: 60 minutes Countdown start time setting range: 1 to 60 minutes (1-minute increments) Alarms: Daily alarm; Hourly time signal Illumination: LED (light-emitting diode); Selectable illumination duration (approximately 1.5 seconds or 3 seconds) E-43 Other: Home City code (can be assigned one of 48 city codes); Standard Time/Daylight Saving Time (summer time) Analog Timekeeping: Hour, minutes (hand moves every 20 seconds) World Time: 48 cities (31 time zones) Other: Daylight Saving Time/Standard Time Home City/World Time City swapping Stopwatch: Measuring unit: 1 second Measuring capacity: 59'59" Measuring modes: Elapsed time, split time, two fi nishes E-44 Other: Button operation tone on/off; Moving the Hands to View the Digital Display Power Supply: Two silver oxide batteries (Type: SR726W) Approximate battery operating time: 2 years under the following conditions: ξ 1 illumination operation (1.5 seconds) per day ξ Alarm: 10 seconds/day Frequent use of illumination runs down the battery. Specifi cations are subject to change without notice. E-45 City Code Table L-1 City Code Table City City name DUBAI KABUL KARACHI DELHI KATHMANDU DHAKA YANGON BANGKOK SINGAPORE HONG KONG BEIJING TAIPEI SEOUL TOKYO ADELAIDE GUAM SYDNEY City City name NOUMEA WELLINGTON City City name PAGO PAGO HONOLULU ANCHORAGE VANCOUVER LOS ANGELES EDMONTON DENVER MEXICO CITY CHICAGO NEW YORK SANTIAGO HALIFAX ST. JOHN'S RIO DE JANEIRO F. DE NORONHA City City name PRAIA LISBON LONDON MADRID PARIS ROME BERLIN STOCKHOLM ATHENS CAIRO JERUSALEM MOSCOW JEDDAH TEHRAN Code UTC Offset/ GMT Differential Code UTC Offset/ GMT Differential Code UTC Offset/ GMT Differential PPG –11 HNL –10 ANC –9 YVR–8 LAXYEA–7 DEN Code UTC Offset/ GMT Differential RAI –1 UTC LIS0 LON MAD PAR DXB +4 KBL +4.5 KHI +5 DEL +5.5 KTM +5.75 DAC +6 RGN +6.5 BKK +7 NOU +11 WLG +12 ξ This table shows the city codes of this watch. (As of January 2016) ξ The rules governing global times (UTC offset and GMT differential) and summer time are determined by each individual country. MEX–6 CHINYC –5 ROMBERSTOATH +1 SIN +8 HKGBJSTPE SCL–4 YHZYYT –3.5 RIO –3 FEN –2 L-2 CAI+2 JRS MOW+3 JEDTHR +3.5 SEL+9 TYO ADL +9.5 GUM+10 SYD L-3
Hướng dẫn sử dụng Đồng hồ Nữ Baby-G BGA-195M-4ADR, mẫu mã mới
Download!
MA1804-EA © 2018 CASIO COMPUTER CO., LTD. User's Guide 5382/5465/5508 ENGLISH Congratulations upon your selection of this CASIO watch. To ensure that this watch provides you with the years of service for which it is designed, carefully read and follow the instructions in this manual, especially the information under "Operating Precautions" and "User Maintenance". Be sure to keep all user documentation handy for future reference. Important! ξ This manual provides a brief overview of your watch. E About This Manual For a full Operation Guide and Q&A information about this product, go to the website below. http://world.casio.com/manual/wat/ E-1 Configuring Home City, Time and Date Settings ξ The operational procedures for Modules 5382, 5465 and 5508 are identical. All of the illustrations in this manual show Module 5382. Module 5382 Module 5465 Module 5508 E-2 2. Press C to move the flashing in the sequence shown below to select a setting. Home City and Summer Time Time and Date C C C City Code DST 12/24-Hour Format Seconds C ξ Configure Home City and summer time settings first. After that, configure time and date settings. 1. In the Timekeeping Mode, hold down A until ADJ appears. ξ This indicates the city code setting mode. E-3 3. Use D and B to change the selected setting. To do this: Change the city code Toggle between Daylight Saving Time (ON) and Standard Time (OFF) Toggle between 12-hour (12H) and 24-hour (24H) timekeeping Reset the seconds to 00 Change the hour or minute Change the year Change the month or day Screen Do this: Use D (East) and B (West). Press D. C Illumination Duration C Hour C Minutes C Press D. Press D. Use D (+) and B (–). Use D (+) and B (–). Day Month Year Button Operation Tone Use D (+) and B (–). On/Off 4. Press A to exit the setting mode. E-4 C C C E-5 Mode Selection and Operations ξ Press C to change the mode. ξ To return to the Timekeeping Mode from any other mode, hold down C for about two seconds. Timekeeping Mode World Time Mode Home Time Turns on Split/Reset Stopwatch Mode Countdown Timer Mode C Start/Stop illumination. World Time E-6 C C Scrolls between cities. World Time City Alarm Mode C C E-7 Misaligned Hands The analog hands may become misaligned as described below if the watch is exposed to strong magnetism, impact, or other abnormal conditions. ξ Analog time and digital time are different from each other If this happens, refer to "Hand Home Position Adjustment" in the Operation Guide available at the CASIO website and adjust the hand alignment. E-8 Specifications Accuracy at normal temperature: ±30 seconds a month Digital Timekeeping: Hour, minutes, seconds, p.m. (P), month, day, day of the week Time format: 12-hour and 24-hour Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099 Other: Home City code (can be assigned one of 48 city codes); Standard Time/Daylight Saving Time (summer time) Analog Timekeeping: Hour, minutes (hand moves every 20 seconds) World Time: 48 cities (31 time zones) Other: Daylight Saving Time/Standard Time Home City/World Time City swapping Stopwatch: Measuring unit: 1 second Measuring capacity: 59'59" Measuring modes: Elapsed time, split time, two finishes E-9 User's Guide 5382/5465/5508 Countdown Timer: Measuring unit: 1 second Countdown range: 60 minutes Countdown start time setting range: 1 to 60 minutes (1-minute increments) Alarms: Daily alarm; Hourly time signal Illumination: LED (light-emitting diode); Selectable illumination duration (approximately 1.5 seconds or 3 seconds) Other: Button operation tone on/off; Moving the Hands to View the Digital Display Power Supply: Two silver oxide batteries (Type: SR726W) Approximate battery operating time: 2 years under the following conditions: ξ 1 illumination operation (1.5 seconds) per day ξ Alarm: 10 seconds/day Frequent use of illumination runs down the battery. Specifications are subject to change without notice. E-10 City Code Table L-1 City Code Table City City name DUBAI KABUL KARACHI DELHI KATHMANDU DHAKA YANGON BANGKOK SINGAPORE HONG KONG BEIJING TAIPEI SEOUL TOKYO ADELAIDE GUAM SYDNEY City City name NOUMEA WELLINGTON City City name PAGO PAGO HONOLULU ANCHORAGE VANCOUVER LOS ANGELES EDMONTON DENVER MEXICO CITY CHICAGO NEW YORK SANTIAGO HALIFAX ST. JOHN'S RIO DE JANEIRO F. DE NORONHA City City name PRAIA LISBON LONDON MADRID PARIS ROME BERLIN STOCKHOLM ATHENS CAIRO JERUSALEM MOSCOW JEDDAH TEHRAN Code UTC Offset/ GMT Differential Code UTC Offset/ GMT Differential Code UTC Offset/ GMT Differential PPG –11 HNL –10 ANC –9 YVR–8 LAXYEA–7 DEN Code UTC Offset/ GMT Differential RAI –1 UTC LIS0 LON MAD PAR DXB +4 KBL +4.5 KHI +5 DEL +5.5 KTM +5.75 DAC +6 RGN +6.5 BKK +7 NOU +11 WLG +12 ξ This table shows the city codes of this watch (As of January 2016). ξ The rules governing global times (UTC offset and GMT differential) and summer time are determined by each individual country. MEX–6 CHINYC –5 ROMBERSTOATH +1 SIN +8 HKGBJSTPE SCL–4 YHZYYT –3.5 RIO –3 FEN –2 L-2 CAI+2 JRS MOW+3 JEDTHR +3.5 SEL+9 TYO ADL +9.5 GUM+10 SYD L-3
Hướng dẫn sử dụng Đồng hồ Nữ Baby-G BGA-190BE-2ADR, mẫu mã mới
Download!
MA1804-EA © 2018 CASIO COMPUTER CO., LTD. User's Guide 5382/5465/5508 ENGLISH Congratulations upon your selection of this CASIO watch. To ensure that this watch provides you with the years of service for which it is designed, carefully read and follow the instructions in this manual, especially the information under "Operating Precautions" and "User Maintenance". Be sure to keep all user documentation handy for future reference. Important! ξ This manual provides a brief overview of your watch. E About This Manual For a full Operation Guide and Q&A information about this product, go to the website below. http://world.casio.com/manual/wat/ E-1 Configuring Home City, Time and Date Settings ξ The operational procedures for Modules 5382, 5465 and 5508 are identical. All of the illustrations in this manual show Module 5382. Module 5382 Module 5465 Module 5508 E-2 2. Press C to move the flashing in the sequence shown below to select a setting. Home City and Summer Time Time and Date C C C City Code DST 12/24-Hour Format Seconds C ξ Configure Home City and summer time settings first. After that, configure time and date settings. 1. In the Timekeeping Mode, hold down A until ADJ appears. ξ This indicates the city code setting mode. E-3 3. Use D and B to change the selected setting. To do this: Change the city code Toggle between Daylight Saving Time (ON) and Standard Time (OFF) Toggle between 12-hour (12H) and 24-hour (24H) timekeeping Reset the seconds to 00 Change the hour or minute Change the year Change the month or day Screen Do this: Use D (East) and B (West). Press D. C Illumination Duration C Hour C Minutes C Press D. Press D. Use D (+) and B (–). Use D (+) and B (–). Day Month Year Button Operation Tone Use D (+) and B (–). On/Off 4. Press A to exit the setting mode. E-4 C C C E-5 Mode Selection and Operations ξ Press C to change the mode. ξ To return to the Timekeeping Mode from any other mode, hold down C for about two seconds. Timekeeping Mode World Time Mode Home Time Turns on Split/Reset Stopwatch Mode Countdown Timer Mode C Start/Stop illumination. World Time E-6 C C Scrolls between cities. World Time City Alarm Mode C C E-7 Misaligned Hands The analog hands may become misaligned as described below if the watch is exposed to strong magnetism, impact, or other abnormal conditions. ξ Analog time and digital time are different from each other If this happens, refer to "Hand Home Position Adjustment" in the Operation Guide available at the CASIO website and adjust the hand alignment. E-8 Specifications Accuracy at normal temperature: ±30 seconds a month Digital Timekeeping: Hour, minutes, seconds, p.m. (P), month, day, day of the week Time format: 12-hour and 24-hour Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099 Other: Home City code (can be assigned one of 48 city codes); Standard Time/Daylight Saving Time (summer time) Analog Timekeeping: Hour, minutes (hand moves every 20 seconds) World Time: 48 cities (31 time zones) Other: Daylight Saving Time/Standard Time Home City/World Time City swapping Stopwatch: Measuring unit: 1 second Measuring capacity: 59'59" Measuring modes: Elapsed time, split time, two finishes E-9 User's Guide 5382/5465/5508 Countdown Timer: Measuring unit: 1 second Countdown range: 60 minutes Countdown start time setting range: 1 to 60 minutes (1-minute increments) Alarms: Daily alarm; Hourly time signal Illumination: LED (light-emitting diode); Selectable illumination duration (approximately 1.5 seconds or 3 seconds) Other: Button operation tone on/off; Moving the Hands to View the Digital Display Power Supply: Two silver oxide batteries (Type: SR726W) Approximate battery operating time: 2 years under the following conditions: ξ 1 illumination operation (1.5 seconds) per day ξ Alarm: 10 seconds/day Frequent use of illumination runs down the battery. Specifications are subject to change without notice. E-10 City Code Table L-1 City Code Table City City name DUBAI KABUL KARACHI DELHI KATHMANDU DHAKA YANGON BANGKOK SINGAPORE HONG KONG BEIJING TAIPEI SEOUL TOKYO ADELAIDE GUAM SYDNEY City City name NOUMEA WELLINGTON City City name PAGO PAGO HONOLULU ANCHORAGE VANCOUVER LOS ANGELES EDMONTON DENVER MEXICO CITY CHICAGO NEW YORK SANTIAGO HALIFAX ST. JOHN'S RIO DE JANEIRO F. DE NORONHA City City name PRAIA LISBON LONDON MADRID PARIS ROME BERLIN STOCKHOLM ATHENS CAIRO JERUSALEM MOSCOW JEDDAH TEHRAN Code UTC Offset/ GMT Differential Code UTC Offset/ GMT Differential Code UTC Offset/ GMT Differential PPG –11 HNL –10 ANC –9 YVR–8 LAXYEA–7 DEN Code UTC Offset/ GMT Differential RAI –1 UTC LIS0 LON MAD PAR DXB +4 KBL +4.5 KHI +5 DEL +5.5 KTM +5.75 DAC +6 RGN +6.5 BKK +7 NOU +11 WLG +12 ξ This table shows the city codes of this watch (As of January 2016). ξ The rules governing global times (UTC offset and GMT differential) and summer time are determined by each individual country. MEX–6 CHINYC –5 ROMBERSTOATH +1 SIN +8 HKGBJSTPE SCL–4 YHZYYT –3.5 RIO –3 FEN –2 L-2 CAI+2 JRS MOW+3 JEDTHR +3.5 SEL+9 TYO ADL +9.5 GUM+10 SYD L-3
Subscribe to:
Posts (Atom)
Hướng dẫn sử dụng Đồng hồ Nam Edifice Casio EFR-526L-7AVUDF, mẫu mã mới
Download! MA1212-EA Ú #!3)/#/-054%2#/ ,4$ Operation Guide 5345 ξ Your watch may differ somewhat from the one shown in the illustra...
-
Download! MA1104-EA About This Manual Operation Guide 3284 ξ Note that the product illustrations in this manual are intended for refer...
-
Download! Hướng dẫn sử dụng Máy Sấy Tóc Áp dụng cho các model: HDB-1825W HDB-1826 HDB-1828F HDB-1839 Hãy giữ lại Hướng Dẫn Sử Dụng vì...
-
Download! How to use this manual MITSUBISHI ELECTRIC 座檯電風扇 ELECTRIC DESK FAN 「零部件名稱/PART NAME 型號/MODEL D12-GJ/GO- PR16-GC/GO- P R18-G3...