Hướng dẫn sử dụng Đồng hồ Nữ Casio LTP-1130A-7ARDF, mẫu mã mới

Download!

MA0801-EA Operation Guide ANALOG (HK-W) • Your watch may differ somewhat from the one shown in the illustration. [Modules 1362, 1398, 1770, 2799, 3378, 4370] To set the time Pull out the crown. Set the hands by rotating the crown. Push the crown back in on a time signal to resume timekeeping. [Modules 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, 5049] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. [Modules 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, Crown [Modules 1782, 4328, 4747] Crown First click (Day setting) Crown 4393, 5025, 5044] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 8:00 p.m. and 2:00 a.m. The day may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown. 3. Push the crown back in to its normal position. [Modules 709, 1333, 1347, 3716] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between 8:00 p.m. and 4:00 a.m. The day and day of the week may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown counterclockwise. 3. Set the day of the week by rotating the crown clockwise. Confirm that the correct language (English or Spanish) is selected. 4. Push the crown back in to its normal position. ■ For watch with the elapsed time bezel (Normal position) Second click (Time setting) [Module 4746] Crown (Normal position) 30 First click (Day setting) First click (Day, day of week setting) Crown (Normal position) SUN 30 Second click (Time setting) [Days of the Week] English Spanish SUN DOM MON LUN TUE MAR WED MIER THU JUEV FRI VIER SAT SAB Rotate the elapsed time bezel to align the 1 0 mark with the minute hand. 0 5 After certain amount of time elapsed, read the 2 0 0 graduation on the elapsed time bezel which 4 30 the minute hand points to. The elapsed time is indicated. • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. Elapsed time bezel 1

Hướng dẫn sử dụng Đồng hồ Nữ Casio LTP-1129G-7BRDF, mẫu mã mới

Download!

MA0801-EA Operation Guide ANALOG (HK-W) • Your watch may differ somewhat from the one shown in the illustration. [Modules 1362, 1398, 1770, 2799, 3378, 4370] To set the time Pull out the crown. Set the hands by rotating the crown. Push the crown back in on a time signal to resume timekeeping. [Modules 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, 5049] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. [Modules 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, Crown [Modules 1782, 4328, 4747] Crown First click (Day setting) Crown 4393, 5025, 5044] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 8:00 p.m. and 2:00 a.m. The day may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown. 3. Push the crown back in to its normal position. [Modules 709, 1333, 1347, 3716] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between 8:00 p.m. and 4:00 a.m. The day and day of the week may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown counterclockwise. 3. Set the day of the week by rotating the crown clockwise. Confirm that the correct language (English or Spanish) is selected. 4. Push the crown back in to its normal position. ■ For watch with the elapsed time bezel (Normal position) Second click (Time setting) [Module 4746] Crown (Normal position) 30 First click (Day setting) First click (Day, day of week setting) Crown (Normal position) SUN 30 Second click (Time setting) [Days of the Week] English Spanish SUN DOM MON LUN TUE MAR WED MIER THU JUEV FRI VIER SAT SAB Rotate the elapsed time bezel to align the 1 0 mark with the minute hand. 0 5 After certain amount of time elapsed, read the 2 0 0 graduation on the elapsed time bezel which 4 30 the minute hand points to. The elapsed time is indicated. • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. Elapsed time bezel 1

Hướng dẫn sử dụng Đồng hồ Nữ Casio LTP-1128G-9ARDF, mẫu mã mới

Download!

MA0801-EA Operation Guide ANALOG (HK-W) • Your watch may differ somewhat from the one shown in the illustration. [Modules 1362, 1398, 1770, 2799, 3378, 4370] To set the time Pull out the crown. Set the hands by rotating the crown. Push the crown back in on a time signal to resume timekeeping. [Modules 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, 5049] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. [Modules 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, Crown [Modules 1782, 4328, 4747] Crown First click (Day setting) Crown 4393, 5025, 5044] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 8:00 p.m. and 2:00 a.m. The day may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown. 3. Push the crown back in to its normal position. [Modules 709, 1333, 1347, 3716] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between 8:00 p.m. and 4:00 a.m. The day and day of the week may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown counterclockwise. 3. Set the day of the week by rotating the crown clockwise. Confirm that the correct language (English or Spanish) is selected. 4. Push the crown back in to its normal position. ■ For watch with the elapsed time bezel (Normal position) Second click (Time setting) [Module 4746] Crown (Normal position) 30 First click (Day setting) First click (Day, day of week setting) Crown (Normal position) SUN 30 Second click (Time setting) [Days of the Week] English Spanish SUN DOM MON LUN TUE MAR WED MIER THU JUEV FRI VIER SAT SAB Rotate the elapsed time bezel to align the 1 0 mark with the minute hand. 0 5 After certain amount of time elapsed, read the 2 0 0 graduation on the elapsed time bezel which 4 30 the minute hand points to. The elapsed time is indicated. • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. Elapsed time bezel 1

Hướng dẫn sử dụng Đồng hồ Nữ Casio LTP-1128G-7BRDF, mẫu mã mới

Download!

MA0801-EA Operation Guide ANALOG (HK-W) • Your watch may differ somewhat from the one shown in the illustration. [Modules 1362, 1398, 1770, 2799, 3378, 4370] To set the time Pull out the crown. Set the hands by rotating the crown. Push the crown back in on a time signal to resume timekeeping. [Modules 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, 5049] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. [Modules 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, Crown [Modules 1782, 4328, 4747] Crown First click (Day setting) Crown 4393, 5025, 5044] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 8:00 p.m. and 2:00 a.m. The day may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown. 3. Push the crown back in to its normal position. [Modules 709, 1333, 1347, 3716] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between 8:00 p.m. and 4:00 a.m. The day and day of the week may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown counterclockwise. 3. Set the day of the week by rotating the crown clockwise. Confirm that the correct language (English or Spanish) is selected. 4. Push the crown back in to its normal position. ■ For watch with the elapsed time bezel (Normal position) Second click (Time setting) [Module 4746] Crown (Normal position) 30 First click (Day setting) First click (Day, day of week setting) Crown (Normal position) SUN 30 Second click (Time setting) [Days of the Week] English Spanish SUN DOM MON LUN TUE MAR WED MIER THU JUEV FRI VIER SAT SAB Rotate the elapsed time bezel to align the 1 0 mark with the minute hand. 0 5 After certain amount of time elapsed, read the 2 0 0 graduation on the elapsed time bezel which 4 30 the minute hand points to. The elapsed time is indicated. • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. Elapsed time bezel 1

Hướng dẫn sử dụng Đồng hồ Nữ Casio LTP-V006L-1BUDF, mẫu mã mới

Download!

MA1104-EA Operation Guide ANALOG(MAF) • Your watch may differ somewhat from the one shown in the illustration. Notes • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. [Modules 5128, 5180, 5199, 5206, 5207, and 5218] To set the time First click (Day setting) 11 When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. Crown 22 Set the hands by rotating the crown. Move the (Normal position) minute hand four or five minutes past the setting you want, and then back them up to the setting. 33 Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 9:00 p.m. and 1:00 Second click a.m. The day may not change in the following day if (Time setting) you do. 11 Pull out the crown to the first click. 22 Set the day by rotating the crown. 33 Push the crown back in to its normal position. [Modules 5125, 5167, 5223, and 5237] To set the time First click 11 When the second hand is at 12 o'clock, pull out the (Day, day of week setting) crown to the second click to stop it. 22 Set the hands by rotating the crown. Move the Crown (Normal position) minute hand four or five minutes past the setting you want, and then back them up to the setting. 33 Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between Second click 9:00 p.m. and 5:00 a.m. The day and day of the (Time setting) week may not change in the following day if you do. 11 Pull out the crown to the first click. 22 Set the day by rotating the crown counterclockwise. 33 Set the day of the week by rotating the crown clockwise. 44 Push the crown back in to its normal position. • For watch with the elapsed time bezel Rotate the elapsed time bezel to align the mark with the minute hand. After certain amount of time elapsed, read the graduation on the elapsed time bezel which the minute hand points to. The elapsed time is indicated. Specifications Module No.Accuracy at normal temperature Elapsed time bezel (per month)Battery type Battery life 5125/5128/5206/ 5207/5237 ±20 seconds SR626SW Approx. 3 years 5167 ±20 seconds SR920SW Approx. 5 years 5180/5199/5223 ±20 seconds SR621SW Approx. 3 years 5218 ±20 seconds SR616SW Approx. 2 years 1

Hướng dẫn sử dụng Đồng hồ Nữ Casio LTP-V006GL-7BUDF, mẫu mã mới

Download!

MA1104-EA Operation Guide ANALOG(MAF) • Your watch may differ somewhat from the one shown in the illustration. Notes • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. [Modules 5128, 5180, 5199, 5206, 5207, and 5218] To set the time First click (Day setting) 11 When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. Crown 22 Set the hands by rotating the crown. Move the (Normal position) minute hand four or five minutes past the setting you want, and then back them up to the setting. 33 Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 9:00 p.m. and 1:00 Second click a.m. The day may not change in the following day if (Time setting) you do. 11 Pull out the crown to the first click. 22 Set the day by rotating the crown. 33 Push the crown back in to its normal position. [Modules 5125, 5167, 5223, and 5237] To set the time First click 11 When the second hand is at 12 o'clock, pull out the (Day, day of week setting) crown to the second click to stop it. 22 Set the hands by rotating the crown. Move the Crown (Normal position) minute hand four or five minutes past the setting you want, and then back them up to the setting. 33 Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between Second click 9:00 p.m. and 5:00 a.m. The day and day of the (Time setting) week may not change in the following day if you do. 11 Pull out the crown to the first click. 22 Set the day by rotating the crown counterclockwise. 33 Set the day of the week by rotating the crown clockwise. 44 Push the crown back in to its normal position. • For watch with the elapsed time bezel Rotate the elapsed time bezel to align the mark with the minute hand. After certain amount of time elapsed, read the graduation on the elapsed time bezel which the minute hand points to. The elapsed time is indicated. Specifications Module No.Accuracy at normal temperature Elapsed time bezel (per month)Battery type Battery life 5125/5128/5206/ 5207/5237 ±20 seconds SR626SW Approx. 3 years 5167 ±20 seconds SR920SW Approx. 5 years 5180/5199/5223 ±20 seconds SR621SW Approx. 3 years 5218 ±20 seconds SR616SW Approx. 2 years 1

Hướng dẫn sử dụng Đồng hồ Nữ Casio LTP-V005L-7BUDF, mẫu mã mới

Download!

MA1301-EA © 2013 CASIO COMPUTER CO., LTD. Operation Guide ANALOG(MAJ) • Your watch may differ somewhat from the one shown in the illustration. Notes • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. [Modules 5284, 5361, and 5364] To set the time Crown 1. When the second hand is at 12 o'clock, pull out the crown to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. [Modules 5128, 5180, 5199, 5206, 5207, 5218, 5250, 5340, 5341, 5342, 5343, 5352, and 5358] To set the timeFirst click (Day setting) 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. Crown 2. Set the hands by rotating the crown. Move the (Normal position) minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 9:00 p.m. and 1:00 Second click a.m. The day may not change in the following day (Time setting) if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown. 3. Push the crown back in to its normal position. [Modules 5125, 5167, 5223, 5237, 5249, and 5339] To set the time First click 1. When the second hand is at 12 o'clock, pull out (Day, day of week setting) the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the Crown minute hand four or five minutes past the setting (Normal position) you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between Second click 9:00 p.m. and 5:00 a.m. The day and day of the (Time setting) week may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown counterclockwise. 3. Set the day of the week by rotating the crown clockwise. 4. Push the crown back in to its normal position. • For watch with the elapsed time bezel Rotate the elapsed time bezel to align the mark with the minute hand. After certain amount of time elapsed, read the graduation on the elapsed time bezel which the minute hand points to. The elapsed time is indicated. Elapsed time bezel Specifications Module No.Accuracy at normal temperature (per month)Battery type Battery life 5125/5128/5206/ 5207/5237/5249/ 5361 ±20 seconds SR626SW Approx. 3 years 5167 ±20 seconds SR920SW Approx. 5 years 5180/5199/5223/ 5342/5343/5358 ±20 seconds SR621SW Approx. 3 years 5218/5250 ±20 seconds SR616SW Approx. 2 years 5284/5364 ±20 seconds SR521SW Approx. 2 years 5339/5340/5341 ±20 seconds SR920SW Approx. 3 years 5352 ±20 seconds SR716SW Approx. 3 years [Module 5364] Low Battery Indicator: Second hand moves in 2-second increments when power is low. 1

Hướng dẫn sử dụng Đồng hồ Nữ Casio LTP-V005L-1BUDF, mẫu mã mới

Download!

MA1301-EA © 2013 CASIO COMPUTER CO., LTD. Operation Guide ANALOG(MAJ) • Your watch may differ somewhat from the one shown in the illustration. Notes • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. [Modules 5284, 5361, and 5364] To set the time Crown 1. When the second hand is at 12 o'clock, pull out the crown to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. [Modules 5128, 5180, 5199, 5206, 5207, 5218, 5250, 5340, 5341, 5342, 5343, 5352, and 5358] To set the timeFirst click (Day setting) 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. Crown 2. Set the hands by rotating the crown. Move the (Normal position) minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 9:00 p.m. and 1:00 Second click a.m. The day may not change in the following day (Time setting) if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown. 3. Push the crown back in to its normal position. [Modules 5125, 5167, 5223, 5237, 5249, and 5339] To set the time First click 1. When the second hand is at 12 o'clock, pull out (Day, day of week setting) the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the Crown minute hand four or five minutes past the setting (Normal position) you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between Second click 9:00 p.m. and 5:00 a.m. The day and day of the (Time setting) week may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown counterclockwise. 3. Set the day of the week by rotating the crown clockwise. 4. Push the crown back in to its normal position. • For watch with the elapsed time bezel Rotate the elapsed time bezel to align the mark with the minute hand. After certain amount of time elapsed, read the graduation on the elapsed time bezel which the minute hand points to. The elapsed time is indicated. Elapsed time bezel Specifications Module No.Accuracy at normal temperature (per month)Battery type Battery life 5125/5128/5206/ 5207/5237/5249/ 5361 ±20 seconds SR626SW Approx. 3 years 5167 ±20 seconds SR920SW Approx. 5 years 5180/5199/5223/ 5342/5343/5358 ±20 seconds SR621SW Approx. 3 years 5218/5250 ±20 seconds SR616SW Approx. 2 years 5284/5364 ±20 seconds SR521SW Approx. 2 years 5339/5340/5341 ±20 seconds SR920SW Approx. 3 years 5352 ±20 seconds SR716SW Approx. 3 years [Module 5364] Low Battery Indicator: Second hand moves in 2-second increments when power is low. 1

Hướng dẫn sử dụng Đồng hồ Nữ Casio LTP-V005L-1AUDF, mẫu mã mới

Download!

MA1301-EA © 2013 CASIO COMPUTER CO., LTD. Operation Guide ANALOG(MAJ) • Your watch may differ somewhat from the one shown in the illustration. Notes • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. [Modules 5284, 5361, and 5364] To set the time Crown 1. When the second hand is at 12 o'clock, pull out the crown to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. [Modules 5128, 5180, 5199, 5206, 5207, 5218, 5250, 5340, 5341, 5342, 5343, 5352, and 5358] To set the timeFirst click (Day setting) 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. Crown 2. Set the hands by rotating the crown. Move the (Normal position) minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 9:00 p.m. and 1:00 Second click a.m. The day may not change in the following day (Time setting) if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown. 3. Push the crown back in to its normal position. [Modules 5125, 5167, 5223, 5237, 5249, and 5339] To set the time First click 1. When the second hand is at 12 o'clock, pull out (Day, day of week setting) the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the Crown minute hand four or five minutes past the setting (Normal position) you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between Second click 9:00 p.m. and 5:00 a.m. The day and day of the (Time setting) week may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown counterclockwise. 3. Set the day of the week by rotating the crown clockwise. 4. Push the crown back in to its normal position. • For watch with the elapsed time bezel Rotate the elapsed time bezel to align the mark with the minute hand. After certain amount of time elapsed, read the graduation on the elapsed time bezel which the minute hand points to. The elapsed time is indicated. Elapsed time bezel Specifications Module No.Accuracy at normal temperature (per month)Battery type Battery life 5125/5128/5206/ 5207/5237/5249/ 5361 ±20 seconds SR626SW Approx. 3 years 5167 ±20 seconds SR920SW Approx. 5 years 5180/5199/5223/ 5342/5343/5358 ±20 seconds SR621SW Approx. 3 years 5218/5250 ±20 seconds SR616SW Approx. 2 years 5284/5364 ±20 seconds SR521SW Approx. 2 years 5339/5340/5341 ±20 seconds SR920SW Approx. 3 years 5352 ±20 seconds SR716SW Approx. 3 years [Module 5364] Low Battery Indicator: Second hand moves in 2-second increments when power is low. 1

Hướng dẫn sử dụng Đồng hồ Nữ Casio LTP-V005GL-9AUDF, mẫu mã mới

Download!

MA1301-EA © 2013 CASIO COMPUTER CO., LTD. Operation Guide ANALOG(MAJ) • Your watch may differ somewhat from the one shown in the illustration. Notes • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. [Modules 5284, 5361, and 5364] To set the time Crown 1. When the second hand is at 12 o'clock, pull out the crown to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. [Modules 5128, 5180, 5199, 5206, 5207, 5218, 5250, 5340, 5341, 5342, 5343, 5352, and 5358] To set the timeFirst click (Day setting) 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. Crown 2. Set the hands by rotating the crown. Move the (Normal position) minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 9:00 p.m. and 1:00 Second click a.m. The day may not change in the following day (Time setting) if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown. 3. Push the crown back in to its normal position. [Modules 5125, 5167, 5223, 5237, 5249, and 5339] To set the time First click 1. When the second hand is at 12 o'clock, pull out (Day, day of week setting) the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the Crown minute hand four or five minutes past the setting (Normal position) you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between Second click 9:00 p.m. and 5:00 a.m. The day and day of the (Time setting) week may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown counterclockwise. 3. Set the day of the week by rotating the crown clockwise. 4. Push the crown back in to its normal position. • For watch with the elapsed time bezel Rotate the elapsed time bezel to align the mark with the minute hand. After certain amount of time elapsed, read the graduation on the elapsed time bezel which the minute hand points to. The elapsed time is indicated. Elapsed time bezel Specifications Module No.Accuracy at normal temperature (per month)Battery type Battery life 5125/5128/5206/ 5207/5237/5249/ 5361 ±20 seconds SR626SW Approx. 3 years 5167 ±20 seconds SR920SW Approx. 5 years 5180/5199/5223/ 5342/5343/5358 ±20 seconds SR621SW Approx. 3 years 5218/5250 ±20 seconds SR616SW Approx. 2 years 5284/5364 ±20 seconds SR521SW Approx. 2 years 5339/5340/5341 ±20 seconds SR920SW Approx. 3 years 5352 ±20 seconds SR716SW Approx. 3 years [Module 5364] Low Battery Indicator: Second hand moves in 2-second increments when power is low. 1

Hướng dẫn sử dụng Đồng hồ Nữ Casio LTP-V004L-7AUDF, mẫu mã mới

Download!

MA0801-EA Operation Guide ANALOG (HK-W) • Your watch may differ somewhat from the one shown in the illustration. [Modules 1362, 1398, 1770, 2799, 3378, 4370] To set the time Pull out the crown. Set the hands by rotating the crown. Push the crown back in on a time signal to resume timekeeping. [Modules 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, 5049] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. [Modules 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, Crown [Modules 1782, 4328, 4747] Crown First click (Day setting) Crown 4393, 5025, 5044] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 8:00 p.m. and 2:00 a.m. The day may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown. 3. Push the crown back in to its normal position. [Modules 709, 1333, 1347, 3716] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between 8:00 p.m. and 4:00 a.m. The day and day of the week may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown counterclockwise. 3. Set the day of the week by rotating the crown clockwise. Confirm that the correct language (English or Spanish) is selected. 4. Push the crown back in to its normal position. ■ For watch with the elapsed time bezel (Normal position) Second click (Time setting) [Module 4746] Crown (Normal position) 30 First click (Day setting) First click (Day, day of week setting) Crown (Normal position) SUN 30 Second click (Time setting) [Days of the Week] English Spanish SUN DOM MON LUN TUE MAR WED MIER THU JUEV FRI VIER SAT SAB Rotate the elapsed time bezel to align the 1 0 mark with the minute hand. 0 5 After certain amount of time elapsed, read the 2 0 0 graduation on the elapsed time bezel which 4 30 the minute hand points to. The elapsed time is indicated. • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. Elapsed time bezel 1

Hướng dẫn sử dụng Đồng hồ Nữ Casio LTP-V004GL-7AUDF, mẫu mã mới

Download!

MA0801-EA Operation Guide ANALOG (HK-W) • Your watch may differ somewhat from the one shown in the illustration. [Modules 1362, 1398, 1770, 2799, 3378, 4370] To set the time Pull out the crown. Set the hands by rotating the crown. Push the crown back in on a time signal to resume timekeeping. [Modules 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, 5049] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. [Modules 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, Crown [Modules 1782, 4328, 4747] Crown First click (Day setting) Crown 4393, 5025, 5044] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 8:00 p.m. and 2:00 a.m. The day may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown. 3. Push the crown back in to its normal position. [Modules 709, 1333, 1347, 3716] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between 8:00 p.m. and 4:00 a.m. The day and day of the week may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown counterclockwise. 3. Set the day of the week by rotating the crown clockwise. Confirm that the correct language (English or Spanish) is selected. 4. Push the crown back in to its normal position. ■ For watch with the elapsed time bezel (Normal position) Second click (Time setting) [Module 4746] Crown (Normal position) 30 First click (Day setting) First click (Day, day of week setting) Crown (Normal position) SUN 30 Second click (Time setting) [Days of the Week] English Spanish SUN DOM MON LUN TUE MAR WED MIER THU JUEV FRI VIER SAT SAB Rotate the elapsed time bezel to align the 1 0 mark with the minute hand. 0 5 After certain amount of time elapsed, read the 2 0 0 graduation on the elapsed time bezel which 4 30 the minute hand points to. The elapsed time is indicated. • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. Elapsed time bezel 1

Hướng dẫn sử dụng Đồng hồ Nữ Casio LTP-V002L-7B2UDF, mẫu mã mới

Download!

MA0801-EA Operation Guide ANALOG (HK-W) • Your watch may differ somewhat from the one shown in the illustration. [Modules 1362, 1398, 1770, 2799, 3378, 4370] To set the time Pull out the crown. Set the hands by rotating the crown. Push the crown back in on a time signal to resume timekeeping. [Modules 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, 5049] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. [Modules 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, Crown [Modules 1782, 4328, 4747] Crown First click (Day setting) Crown 4393, 5025, 5044] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 8:00 p.m. and 2:00 a.m. The day may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown. 3. Push the crown back in to its normal position. [Modules 709, 1333, 1347, 3716] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between 8:00 p.m. and 4:00 a.m. The day and day of the week may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown counterclockwise. 3. Set the day of the week by rotating the crown clockwise. Confirm that the correct language (English or Spanish) is selected. 4. Push the crown back in to its normal position. ■ For watch with the elapsed time bezel (Normal position) Second click (Time setting) [Module 4746] Crown (Normal position) 30 First click (Day setting) First click (Day, day of week setting) Crown (Normal position) SUN 30 Second click (Time setting) [Days of the Week] English Spanish SUN DOM MON LUN TUE MAR WED MIER THU JUEV FRI VIER SAT SAB Rotate the elapsed time bezel to align the 1 0 mark with the minute hand. 0 5 After certain amount of time elapsed, read the 2 0 0 graduation on the elapsed time bezel which 4 30 the minute hand points to. The elapsed time is indicated. • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. Elapsed time bezel 1

Hướng dẫn sử dụng Đồng hồ Nữ Casio LTP-V002L-1BUDF, mẫu mã mới

Download!

MA0801-EA Operation Guide ANALOG (HK-W) • Your watch may differ somewhat from the one shown in the illustration. [Modules 1362, 1398, 1770, 2799, 3378, 4370] To set the time Pull out the crown. Set the hands by rotating the crown. Push the crown back in on a time signal to resume timekeeping. [Modules 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, 5049] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. [Modules 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, Crown [Modules 1782, 4328, 4747] Crown First click (Day setting) Crown 4393, 5025, 5044] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 8:00 p.m. and 2:00 a.m. The day may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown. 3. Push the crown back in to its normal position. [Modules 709, 1333, 1347, 3716] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between 8:00 p.m. and 4:00 a.m. The day and day of the week may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown counterclockwise. 3. Set the day of the week by rotating the crown clockwise. Confirm that the correct language (English or Spanish) is selected. 4. Push the crown back in to its normal position. ■ For watch with the elapsed time bezel (Normal position) Second click (Time setting) [Module 4746] Crown (Normal position) 30 First click (Day setting) First click (Day, day of week setting) Crown (Normal position) SUN 30 Second click (Time setting) [Days of the Week] English Spanish SUN DOM MON LUN TUE MAR WED MIER THU JUEV FRI VIER SAT SAB Rotate the elapsed time bezel to align the 1 0 mark with the minute hand. 0 5 After certain amount of time elapsed, read the 2 0 0 graduation on the elapsed time bezel which 4 30 the minute hand points to. The elapsed time is indicated. • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. Elapsed time bezel 1

Hướng dẫn sử dụng Đồng hồ Nữ Casio LTP-V001L-7BUDF, mẫu mã mới

Download!

MA1301-EA © 2013 CASIO COMPUTER CO., LTD. Operation Guide ANALOG(MAJ) • Your watch may differ somewhat from the one shown in the illustration. Notes • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. [Modules 5284, 5361, and 5364] To set the time Crown 1. When the second hand is at 12 o'clock, pull out the crown to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. [Modules 5128, 5180, 5199, 5206, 5207, 5218, 5250, 5340, 5341, 5342, 5343, 5352, and 5358] To set the timeFirst click (Day setting) 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. Crown 2. Set the hands by rotating the crown. Move the (Normal position) minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 9:00 p.m. and 1:00 Second click a.m. The day may not change in the following day (Time setting) if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown. 3. Push the crown back in to its normal position. [Modules 5125, 5167, 5223, 5237, 5249, and 5339] To set the time First click 1. When the second hand is at 12 o'clock, pull out (Day, day of week setting) the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the Crown minute hand four or five minutes past the setting (Normal position) you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between Second click 9:00 p.m. and 5:00 a.m. The day and day of the (Time setting) week may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown counterclockwise. 3. Set the day of the week by rotating the crown clockwise. 4. Push the crown back in to its normal position. • For watch with the elapsed time bezel Rotate the elapsed time bezel to align the mark with the minute hand. After certain amount of time elapsed, read the graduation on the elapsed time bezel which the minute hand points to. The elapsed time is indicated. Elapsed time bezel Specifications Module No.Accuracy at normal temperature (per month)Battery type Battery life 5125/5128/5206/ 5207/5237/5249/ 5361 ±20 seconds SR626SW Approx. 3 years 5167 ±20 seconds SR920SW Approx. 5 years 5180/5199/5223/ 5342/5343/5358 ±20 seconds SR621SW Approx. 3 years 5218/5250 ±20 seconds SR616SW Approx. 2 years 5284/5364 ±20 seconds SR521SW Approx. 2 years 5339/5340/5341 ±20 seconds SR920SW Approx. 3 years 5352 ±20 seconds SR716SW Approx. 3 years [Module 5364] Low Battery Indicator: Second hand moves in 2-second increments when power is low. 1

Hướng dẫn sử dụng Đồng hồ Nữ Casio LTP-1095Q-7A, mẫu mã mới

Download!

MA0801-EA Operation Guide ANALOG (HK-W) • Your watch may differ somewhat from the one shown in the illustration. [Modules 1362, 1398, 1770, 2799, 3378, 4370] To set the time Pull out the crown. Set the hands by rotating the crown. Push the crown back in on a time signal to resume timekeeping. [Modules 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, 5049] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. [Modules 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, Crown [Modules 1782, 4328, 4747] Crown First click (Day setting) Crown 4393, 5025, 5044] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 8:00 p.m. and 2:00 a.m. The day may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown. 3. Push the crown back in to its normal position. [Modules 709, 1333, 1347, 3716] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between 8:00 p.m. and 4:00 a.m. The day and day of the week may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown counterclockwise. 3. Set the day of the week by rotating the crown clockwise. Confirm that the correct language (English or Spanish) is selected. 4. Push the crown back in to its normal position. ■ For watch with the elapsed time bezel (Normal position) Second click (Time setting) [Module 4746] Crown (Normal position) 30 First click (Day setting) First click (Day, day of week setting) Crown (Normal position) SUN 30 Second click (Time setting) [Days of the Week] English Spanish SUN DOM MON LUN TUE MAR WED MIER THU JUEV FRI VIER SAT SAB Rotate the elapsed time bezel to align the 1 0 mark with the minute hand. 0 5 After certain amount of time elapsed, read the 2 0 0 graduation on the elapsed time bezel which 4 30 the minute hand points to. The elapsed time is indicated. • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. Elapsed time bezel 1

Hướng dẫn sử dụng Đồng hồ Nữ Casio LTP-1095Q-1A, mẫu mã mới

Download!

MA0801-EA Operation Guide ANALOG (HK-W) • Your watch may differ somewhat from the one shown in the illustration. [Modules 1362, 1398, 1770, 2799, 3378, 4370] To set the time Pull out the crown. Set the hands by rotating the crown. Push the crown back in on a time signal to resume timekeeping. [Modules 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, 5049] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. [Modules 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, Crown [Modules 1782, 4328, 4747] Crown First click (Day setting) Crown 4393, 5025, 5044] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 8:00 p.m. and 2:00 a.m. The day may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown. 3. Push the crown back in to its normal position. [Modules 709, 1333, 1347, 3716] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between 8:00 p.m. and 4:00 a.m. The day and day of the week may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown counterclockwise. 3. Set the day of the week by rotating the crown clockwise. Confirm that the correct language (English or Spanish) is selected. 4. Push the crown back in to its normal position. ■ For watch with the elapsed time bezel (Normal position) Second click (Time setting) [Module 4746] Crown (Normal position) 30 First click (Day setting) First click (Day, day of week setting) Crown (Normal position) SUN 30 Second click (Time setting) [Days of the Week] English Spanish SUN DOM MON LUN TUE MAR WED MIER THU JUEV FRI VIER SAT SAB Rotate the elapsed time bezel to align the 1 0 mark with the minute hand. 0 5 After certain amount of time elapsed, read the 2 0 0 graduation on the elapsed time bezel which 4 30 the minute hand points to. The elapsed time is indicated. • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. Elapsed time bezel 1

Hướng dẫn sử dụng Đồng hồ Nữ Casio LTP-1095E-7BDF, mẫu mã mới

Download!

MA0801-EA Operation Guide ANALOG (HK-W) • Your watch may differ somewhat from the one shown in the illustration. [Modules 1362, 1398, 1770, 2799, 3378, 4370] To set the time Pull out the crown. Set the hands by rotating the crown. Push the crown back in on a time signal to resume timekeeping. [Modules 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, 5049] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. [Modules 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, Crown [Modules 1782, 4328, 4747] Crown First click (Day setting) Crown 4393, 5025, 5044] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 8:00 p.m. and 2:00 a.m. The day may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown. 3. Push the crown back in to its normal position. [Modules 709, 1333, 1347, 3716] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between 8:00 p.m. and 4:00 a.m. The day and day of the week may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown counterclockwise. 3. Set the day of the week by rotating the crown clockwise. Confirm that the correct language (English or Spanish) is selected. 4. Push the crown back in to its normal position. ■ For watch with the elapsed time bezel (Normal position) Second click (Time setting) [Module 4746] Crown (Normal position) 30 First click (Day setting) First click (Day, day of week setting) Crown (Normal position) SUN 30 Second click (Time setting) [Days of the Week] English Spanish SUN DOM MON LUN TUE MAR WED MIER THU JUEV FRI VIER SAT SAB Rotate the elapsed time bezel to align the 1 0 mark with the minute hand. 0 5 After certain amount of time elapsed, read the 2 0 0 graduation on the elapsed time bezel which 4 30 the minute hand points to. The elapsed time is indicated. • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. Elapsed time bezel 1

Hướng dẫn sử dụng Đồng hồ Nữ Casio LTP-1095E-7ADF, mẫu mã mới

Download!

MA0801-EA Operation Guide ANALOG (HK-W) • Your watch may differ somewhat from the one shown in the illustration. [Modules 1362, 1398, 1770, 2799, 3378, 4370] To set the time Pull out the crown. Set the hands by rotating the crown. Push the crown back in on a time signal to resume timekeeping. [Modules 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, 5049] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. [Modules 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, Crown [Modules 1782, 4328, 4747] Crown First click (Day setting) Crown 4393, 5025, 5044] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 8:00 p.m. and 2:00 a.m. The day may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown. 3. Push the crown back in to its normal position. [Modules 709, 1333, 1347, 3716] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between 8:00 p.m. and 4:00 a.m. The day and day of the week may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown counterclockwise. 3. Set the day of the week by rotating the crown clockwise. Confirm that the correct language (English or Spanish) is selected. 4. Push the crown back in to its normal position. ■ For watch with the elapsed time bezel (Normal position) Second click (Time setting) [Module 4746] Crown (Normal position) 30 First click (Day setting) First click (Day, day of week setting) Crown (Normal position) SUN 30 Second click (Time setting) [Days of the Week] English Spanish SUN DOM MON LUN TUE MAR WED MIER THU JUEV FRI VIER SAT SAB Rotate the elapsed time bezel to align the 1 0 mark with the minute hand. 0 5 After certain amount of time elapsed, read the 2 0 0 graduation on the elapsed time bezel which 4 30 the minute hand points to. The elapsed time is indicated. • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. Elapsed time bezel 1

Hướng dẫn sử dụng Đồng hồ Nữ Casio LTP-1094Q-9BRDF, mẫu mã mới

Download!

MA0801-EA Operation Guide ANALOG (HK-W) • Your watch may differ somewhat from the one shown in the illustration. [Modules 1362, 1398, 1770, 2799, 3378, 4370] To set the time Pull out the crown. Set the hands by rotating the crown. Push the crown back in on a time signal to resume timekeeping. [Modules 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, 5049] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. [Modules 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, Crown [Modules 1782, 4328, 4747] Crown First click (Day setting) Crown 4393, 5025, 5044] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 8:00 p.m. and 2:00 a.m. The day may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown. 3. Push the crown back in to its normal position. [Modules 709, 1333, 1347, 3716] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between 8:00 p.m. and 4:00 a.m. The day and day of the week may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown counterclockwise. 3. Set the day of the week by rotating the crown clockwise. Confirm that the correct language (English or Spanish) is selected. 4. Push the crown back in to its normal position. ■ For watch with the elapsed time bezel (Normal position) Second click (Time setting) [Module 4746] Crown (Normal position) 30 First click (Day setting) First click (Day, day of week setting) Crown (Normal position) SUN 30 Second click (Time setting) [Days of the Week] English Spanish SUN DOM MON LUN TUE MAR WED MIER THU JUEV FRI VIER SAT SAB Rotate the elapsed time bezel to align the 1 0 mark with the minute hand. 0 5 After certain amount of time elapsed, read the 2 0 0 graduation on the elapsed time bezel which 4 30 the minute hand points to. The elapsed time is indicated. • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. Elapsed time bezel 1

Hướng dẫn sử dụng Đồng hồ Nữ Casio LTP-1094Q-7B8RDF, mẫu mã mới

Download!

MA0801-EA Operation Guide ANALOG (HK-W) • Your watch may differ somewhat from the one shown in the illustration. [Modules 1362, 1398, 1770, 2799, 3378, 4370] To set the time Pull out the crown. Set the hands by rotating the crown. Push the crown back in on a time signal to resume timekeeping. [Modules 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, 5049] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. [Modules 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, Crown [Modules 1782, 4328, 4747] Crown First click (Day setting) Crown 4393, 5025, 5044] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 8:00 p.m. and 2:00 a.m. The day may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown. 3. Push the crown back in to its normal position. [Modules 709, 1333, 1347, 3716] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between 8:00 p.m. and 4:00 a.m. The day and day of the week may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown counterclockwise. 3. Set the day of the week by rotating the crown clockwise. Confirm that the correct language (English or Spanish) is selected. 4. Push the crown back in to its normal position. ■ For watch with the elapsed time bezel (Normal position) Second click (Time setting) [Module 4746] Crown (Normal position) 30 First click (Day setting) First click (Day, day of week setting) Crown (Normal position) SUN 30 Second click (Time setting) [Days of the Week] English Spanish SUN DOM MON LUN TUE MAR WED MIER THU JUEV FRI VIER SAT SAB Rotate the elapsed time bezel to align the 1 0 mark with the minute hand. 0 5 After certain amount of time elapsed, read the 2 0 0 graduation on the elapsed time bezel which 4 30 the minute hand points to. The elapsed time is indicated. • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. Elapsed time bezel 1

Hướng dẫn sử dụng Đồng hồ Nữ Casio LTP-1094Q-7B6RDF, mẫu mã mới

Download!

MA0801-EA Operation Guide ANALOG (HK-W) • Your watch may differ somewhat from the one shown in the illustration. [Modules 1362, 1398, 1770, 2799, 3378, 4370] To set the time Pull out the crown. Set the hands by rotating the crown. Push the crown back in on a time signal to resume timekeeping. [Modules 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, 5049] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. [Modules 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, Crown [Modules 1782, 4328, 4747] Crown First click (Day setting) Crown 4393, 5025, 5044] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 8:00 p.m. and 2:00 a.m. The day may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown. 3. Push the crown back in to its normal position. [Modules 709, 1333, 1347, 3716] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between 8:00 p.m. and 4:00 a.m. The day and day of the week may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown counterclockwise. 3. Set the day of the week by rotating the crown clockwise. Confirm that the correct language (English or Spanish) is selected. 4. Push the crown back in to its normal position. ■ For watch with the elapsed time bezel (Normal position) Second click (Time setting) [Module 4746] Crown (Normal position) 30 First click (Day setting) First click (Day, day of week setting) Crown (Normal position) SUN 30 Second click (Time setting) [Days of the Week] English Spanish SUN DOM MON LUN TUE MAR WED MIER THU JUEV FRI VIER SAT SAB Rotate the elapsed time bezel to align the 1 0 mark with the minute hand. 0 5 After certain amount of time elapsed, read the 2 0 0 graduation on the elapsed time bezel which 4 30 the minute hand points to. The elapsed time is indicated. • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. Elapsed time bezel 1

Hướng dẫn sử dụng Đồng hồ Nữ Casio LTP-1094Q-7B4RDF, mẫu mã mới

Download!

MA0801-EA Operation Guide ANALOG (HK-W) • Your watch may differ somewhat from the one shown in the illustration. [Modules 1362, 1398, 1770, 2799, 3378, 4370] To set the time Pull out the crown. Set the hands by rotating the crown. Push the crown back in on a time signal to resume timekeeping. [Modules 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, 5049] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. [Modules 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, Crown [Modules 1782, 4328, 4747] Crown First click (Day setting) Crown 4393, 5025, 5044] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 8:00 p.m. and 2:00 a.m. The day may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown. 3. Push the crown back in to its normal position. [Modules 709, 1333, 1347, 3716] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between 8:00 p.m. and 4:00 a.m. The day and day of the week may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown counterclockwise. 3. Set the day of the week by rotating the crown clockwise. Confirm that the correct language (English or Spanish) is selected. 4. Push the crown back in to its normal position. ■ For watch with the elapsed time bezel (Normal position) Second click (Time setting) [Module 4746] Crown (Normal position) 30 First click (Day setting) First click (Day, day of week setting) Crown (Normal position) SUN 30 Second click (Time setting) [Days of the Week] English Spanish SUN DOM MON LUN TUE MAR WED MIER THU JUEV FRI VIER SAT SAB Rotate the elapsed time bezel to align the 1 0 mark with the minute hand. 0 5 After certain amount of time elapsed, read the 2 0 0 graduation on the elapsed time bezel which 4 30 the minute hand points to. The elapsed time is indicated. • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. Elapsed time bezel 1

Hướng dẫn sử dụng Đồng hồ Nữ Casio LTP-1094Q-7ARDF, mẫu mã mới

Download!

MA0801-EA Operation Guide ANALOG (HK-W) • Your watch may differ somewhat from the one shown in the illustration. [Modules 1362, 1398, 1770, 2799, 3378, 4370] To set the time Pull out the crown. Set the hands by rotating the crown. Push the crown back in on a time signal to resume timekeeping. [Modules 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, 5049] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. [Modules 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, Crown [Modules 1782, 4328, 4747] Crown First click (Day setting) Crown 4393, 5025, 5044] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 8:00 p.m. and 2:00 a.m. The day may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown. 3. Push the crown back in to its normal position. [Modules 709, 1333, 1347, 3716] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between 8:00 p.m. and 4:00 a.m. The day and day of the week may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown counterclockwise. 3. Set the day of the week by rotating the crown clockwise. Confirm that the correct language (English or Spanish) is selected. 4. Push the crown back in to its normal position. ■ For watch with the elapsed time bezel (Normal position) Second click (Time setting) [Module 4746] Crown (Normal position) 30 First click (Day setting) First click (Day, day of week setting) Crown (Normal position) SUN 30 Second click (Time setting) [Days of the Week] English Spanish SUN DOM MON LUN TUE MAR WED MIER THU JUEV FRI VIER SAT SAB Rotate the elapsed time bezel to align the 1 0 mark with the minute hand. 0 5 After certain amount of time elapsed, read the 2 0 0 graduation on the elapsed time bezel which 4 30 the minute hand points to. The elapsed time is indicated. • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. Elapsed time bezel 1

Hướng dẫn sử dụng Đồng hồ Nữ Casio LTP-1094Q-1ARDF, mẫu mã mới

Download!

MA0801-EA Operation Guide ANALOG (HK-W) • Your watch may differ somewhat from the one shown in the illustration. [Modules 1362, 1398, 1770, 2799, 3378, 4370] To set the time Pull out the crown. Set the hands by rotating the crown. Push the crown back in on a time signal to resume timekeeping. [Modules 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, 5049] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. [Modules 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, Crown [Modules 1782, 4328, 4747] Crown First click (Day setting) Crown 4393, 5025, 5044] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 8:00 p.m. and 2:00 a.m. The day may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown. 3. Push the crown back in to its normal position. [Modules 709, 1333, 1347, 3716] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between 8:00 p.m. and 4:00 a.m. The day and day of the week may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown counterclockwise. 3. Set the day of the week by rotating the crown clockwise. Confirm that the correct language (English or Spanish) is selected. 4. Push the crown back in to its normal position. ■ For watch with the elapsed time bezel (Normal position) Second click (Time setting) [Module 4746] Crown (Normal position) 30 First click (Day setting) First click (Day, day of week setting) Crown (Normal position) SUN 30 Second click (Time setting) [Days of the Week] English Spanish SUN DOM MON LUN TUE MAR WED MIER THU JUEV FRI VIER SAT SAB Rotate the elapsed time bezel to align the 1 0 mark with the minute hand. 0 5 After certain amount of time elapsed, read the 2 0 0 graduation on the elapsed time bezel which 4 30 the minute hand points to. The elapsed time is indicated. • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. Elapsed time bezel 1

Hướng dẫn sử dụng Đồng hồ Nữ Casio LTP-1094E-7BRDF, mẫu mã mới

Download!

MA0801-EA Operation Guide ANALOG (HK-W) • Your watch may differ somewhat from the one shown in the illustration. [Modules 1362, 1398, 1770, 2799, 3378, 4370] To set the time Pull out the crown. Set the hands by rotating the crown. Push the crown back in on a time signal to resume timekeeping. [Modules 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, 5049] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. [Modules 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, Crown [Modules 1782, 4328, 4747] Crown First click (Day setting) Crown 4393, 5025, 5044] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 8:00 p.m. and 2:00 a.m. The day may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown. 3. Push the crown back in to its normal position. [Modules 709, 1333, 1347, 3716] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between 8:00 p.m. and 4:00 a.m. The day and day of the week may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown counterclockwise. 3. Set the day of the week by rotating the crown clockwise. Confirm that the correct language (English or Spanish) is selected. 4. Push the crown back in to its normal position. ■ For watch with the elapsed time bezel (Normal position) Second click (Time setting) [Module 4746] Crown (Normal position) 30 First click (Day setting) First click (Day, day of week setting) Crown (Normal position) SUN 30 Second click (Time setting) [Days of the Week] English Spanish SUN DOM MON LUN TUE MAR WED MIER THU JUEV FRI VIER SAT SAB Rotate the elapsed time bezel to align the 1 0 mark with the minute hand. 0 5 After certain amount of time elapsed, read the 2 0 0 graduation on the elapsed time bezel which 4 30 the minute hand points to. The elapsed time is indicated. • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. Elapsed time bezel 1

Hướng dẫn sử dụng Đồng hồ Nữ Casio LTP-1094E-7ARDF, mẫu mã mới

Download!

USER'S GUIDE ANALOG ● To set time 1) Pull the crown out when the second hand at 12 o'clock position and the second hand stops. 2) Set the hands by turning the crown. 3) In accordance with a time signal, push the crown in. Crown ●For watch with a date display To Set Time 1) Pull the crown out to the second click when the second hand is at the 12 o'clock position and the second hand stops. 2) Turn the hands clockwise and put the watch four or five minutes forward. Then back them out . 3) In accordance with a time signal, push the crown in. To Set Date 1) Pull the crown out to the first click. 2) Set the day by turning the crown clockwise. 3) Push the crown in to the nomal position. Crown (Normal position) First click (Setting date) ●For watch with a screwlock crown To Set Time 1) Pull the crown out when the second click when the second hand is at the 12 o'clock position and the second hand stops. 2) Turn the hands clockwise and put the watch four or five minutes forward. Then back them out . 3) Push the crown in to the normal position on a time signal. To Set Day-date 1) Pull the crown out to the first click. 2) Set the hands by turning the crown clockwise. Set the date by turning the crown counterclockwise. Check whether the day is English or Spanish. 3) Push the crown in to the nomal position. Note:Avoid setting the day-date between 10:00 p.m. and 6:30 a.m. (the day-date display may not change in the following day). 30 Second click Crown (Normal position) First click [Day display] English Spanish (Setting time) The configuration of your watch may differ somewhat from that shown in the illustration SUN 30 (Setting day-date) Second click (Setting time) SUN MON TUE WED THU DOM LUN MAR MIE JUE The configuration of your watch may differ somewhat from that shown in the illustration FRI SAT VIE SAB ● For watch with a backlight About the backlight • Hold down L to illuminate the face of the watch. • With Modules 1319 and 2312, pressing L illuminates the display for about two or three seconds. • With Modules 2342 and 2343, pressing L illuminates the display for about one second. • The backlight of this watch employs an electroluminescent (EL) light, which loses its illuminating power after very long term use. • Frequent use of the backlight shortens the battery life. ● For watch with the elapsed time bezel Rotate the elapsed time bezel to align the mark with the minute hand. After certain amount of time elapsed, read the graduation on the elapsed time bezel which the minute hand points to. The elapsed time is indicated. 1 ● For watch with a screwlock crown About the screwlock crown • Some water resistant models are equipped with a screwlock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. 0 • Leaving the backlight on for a long time or turning on the 5 0Elapsed backlight while battery power is low can cause the hands of the 2 0 0 watch to stop momentarily. 4 30 time bezel Crown L (Light button) Crown Crown and L (Light button)

Hướng dẫn sử dụng Đồng hồ Nam Casio MRW-200H-9BVDF, mẫu mã mới

Download!

Operation Guide ANA (MAA) MA0906-EA • Your watch may differ somewhat from the one shown in the illustration. Notes • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. [Module 5128] To set the time 11 When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 22 Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 33 Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 9:00 p.m. and 1:00 a.m. The day may not change in the following day if you do. 11 Pull out the crown to the first click. 22 Set the day by rotating the crown. 33 Push the crown back in to its normal position. [Module 5125] To set the time 11 When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 22 Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 33 Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between 9:00 p.m. and 5:00 a.m. The day and day of the week may not change in the following day if you do. 11 Pull out the crown to the first click. 22 Set the day by rotating the crown counterclockwise. First click (Day setting) Crown (Normal position) Second click (Time setting) First click (Day, day of week setting) Crown (Normal position) Second click (Time setting) 33 Set the day of the week by rotating the crown clockwise. 44 Push the crown back in to its normal position. • For watch with the elapsed time bezel Rotate the elapsed time bezel to align the mark with the minute hand. After certain amount of time elapsed, read the graduation on the elapsed time bezel which the minute hand points to. The elapsed time is indicated. Specifications Module No.Accuracy at normal temperature Elapsed time bezel (per month)Battery type Battery life 5125/5128 ±20 seconds SR626SW Approx. 3 years 1