Hướng dẫn sử dụng Đồng hồ Nữ Casio LTP-V005GL-9AUDF, mẫu mã mới

Download!

MA1301-EA © 2013 CASIO COMPUTER CO., LTD. Operation Guide ANALOG(MAJ) • Your watch may differ somewhat from the one shown in the illustration. Notes • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. [Modules 5284, 5361, and 5364] To set the time Crown 1. When the second hand is at 12 o'clock, pull out the crown to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. [Modules 5128, 5180, 5199, 5206, 5207, 5218, 5250, 5340, 5341, 5342, 5343, 5352, and 5358] To set the timeFirst click (Day setting) 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. Crown 2. Set the hands by rotating the crown. Move the (Normal position) minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 9:00 p.m. and 1:00 Second click a.m. The day may not change in the following day (Time setting) if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown. 3. Push the crown back in to its normal position. [Modules 5125, 5167, 5223, 5237, 5249, and 5339] To set the time First click 1. When the second hand is at 12 o'clock, pull out (Day, day of week setting) the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the Crown minute hand four or five minutes past the setting (Normal position) you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between Second click 9:00 p.m. and 5:00 a.m. The day and day of the (Time setting) week may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown counterclockwise. 3. Set the day of the week by rotating the crown clockwise. 4. Push the crown back in to its normal position. • For watch with the elapsed time bezel Rotate the elapsed time bezel to align the mark with the minute hand. After certain amount of time elapsed, read the graduation on the elapsed time bezel which the minute hand points to. The elapsed time is indicated. Elapsed time bezel Specifications Module No.Accuracy at normal temperature (per month)Battery type Battery life 5125/5128/5206/ 5207/5237/5249/ 5361 ±20 seconds SR626SW Approx. 3 years 5167 ±20 seconds SR920SW Approx. 5 years 5180/5199/5223/ 5342/5343/5358 ±20 seconds SR621SW Approx. 3 years 5218/5250 ±20 seconds SR616SW Approx. 2 years 5284/5364 ±20 seconds SR521SW Approx. 2 years 5339/5340/5341 ±20 seconds SR920SW Approx. 3 years 5352 ±20 seconds SR716SW Approx. 3 years [Module 5364] Low Battery Indicator: Second hand moves in 2-second increments when power is low. 1