Sunday, January 2, 2022
Hướng dẫn sử dụng Đồng hồ Nam Casio MRW-200H-7BVDF, mẫu mã mới
Download!
Operation Guide ANA (MAA) MA0906-EA • Your watch may differ somewhat from the one shown in the illustration. Notes • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. [Module 5128] To set the time 11 When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 22 Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 33 Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 9:00 p.m. and 1:00 a.m. The day may not change in the following day if you do. 11 Pull out the crown to the first click. 22 Set the day by rotating the crown. 33 Push the crown back in to its normal position. [Module 5125] To set the time 11 When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 22 Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 33 Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between 9:00 p.m. and 5:00 a.m. The day and day of the week may not change in the following day if you do. 11 Pull out the crown to the first click. 22 Set the day by rotating the crown counterclockwise. First click (Day setting) Crown (Normal position) Second click (Time setting) First click (Day, day of week setting) Crown (Normal position) Second click (Time setting) 33 Set the day of the week by rotating the crown clockwise. 44 Push the crown back in to its normal position. • For watch with the elapsed time bezel Rotate the elapsed time bezel to align the mark with the minute hand. After certain amount of time elapsed, read the graduation on the elapsed time bezel which the minute hand points to. The elapsed time is indicated. Specifications Module No.Accuracy at normal temperature Elapsed time bezel (per month)Battery type Battery life 5125/5128 ±20 seconds SR626SW Approx. 3 years 1
Saturday, January 1, 2022
Hướng dẫn sử dụng Đồng hồ Nam Casio MRW-200H-2B3VDF, mẫu mã mới
Download!
Operation Guide ANA (MAA) MA0906-EA • Your watch may differ somewhat from the one shown in the illustration. Notes • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. [Module 5128] To set the time 11 When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 22 Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 33 Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 9:00 p.m. and 1:00 a.m. The day may not change in the following day if you do. 11 Pull out the crown to the first click. 22 Set the day by rotating the crown. 33 Push the crown back in to its normal position. [Module 5125] To set the time 11 When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 22 Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 33 Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between 9:00 p.m. and 5:00 a.m. The day and day of the week may not change in the following day if you do. 11 Pull out the crown to the first click. 22 Set the day by rotating the crown counterclockwise. First click (Day setting) Crown (Normal position) Second click (Time setting) First click (Day, day of week setting) Crown (Normal position) Second click (Time setting) 33 Set the day of the week by rotating the crown clockwise. 44 Push the crown back in to its normal position. • For watch with the elapsed time bezel Rotate the elapsed time bezel to align the mark with the minute hand. After certain amount of time elapsed, read the graduation on the elapsed time bezel which the minute hand points to. The elapsed time is indicated. Specifications Module No.Accuracy at normal temperature Elapsed time bezel (per month)Battery type Battery life 5125/5128 ±20 seconds SR626SW Approx. 3 years 1
Hướng dẫn sử dụng Đồng hồ Nam Casio MRW-200H-1B3VDF, mẫu mã mới
Download!
Operation Guide ANA (MAA) MA0906-EA • Your watch may differ somewhat from the one shown in the illustration. Notes • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. [Module 5128] To set the time 11 When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 22 Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 33 Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 9:00 p.m. and 1:00 a.m. The day may not change in the following day if you do. 11 Pull out the crown to the first click. 22 Set the day by rotating the crown. 33 Push the crown back in to its normal position. [Module 5125] To set the time 11 When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 22 Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 33 Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between 9:00 p.m. and 5:00 a.m. The day and day of the week may not change in the following day if you do. 11 Pull out the crown to the first click. 22 Set the day by rotating the crown counterclockwise. First click (Day setting) Crown (Normal position) Second click (Time setting) First click (Day, day of week setting) Crown (Normal position) Second click (Time setting) 33 Set the day of the week by rotating the crown clockwise. 44 Push the crown back in to its normal position. • For watch with the elapsed time bezel Rotate the elapsed time bezel to align the mark with the minute hand. After certain amount of time elapsed, read the graduation on the elapsed time bezel which the minute hand points to. The elapsed time is indicated. Specifications Module No.Accuracy at normal temperature Elapsed time bezel (per month)Battery type Battery life 5125/5128 ±20 seconds SR626SW Approx. 3 years 1
Hướng dẫn sử dụng Đồng hồ Nam Casio MQ-24-7E2LDF, mẫu mã mới
Download!
MA0801-EA Operation Guide ANALOG (HK-W) • Your watch may differ somewhat from the one shown in the illustration. [Modules 1362, 1398, 1770, 2799, 3378, 4370] To set the time Pull out the crown. Set the hands by rotating the crown. Push the crown back in on a time signal to resume timekeeping. [Modules 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, 5049] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. [Modules 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, Crown [Modules 1782, 4328, 4747] Crown First click (Day setting) Crown 4393, 5025, 5044] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 8:00 p.m. and 2:00 a.m. The day may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown. 3. Push the crown back in to its normal position. [Modules 709, 1333, 1347, 3716] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between 8:00 p.m. and 4:00 a.m. The day and day of the week may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown counterclockwise. 3. Set the day of the week by rotating the crown clockwise. Confirm that the correct language (English or Spanish) is selected. 4. Push the crown back in to its normal position. ■ For watch with the elapsed time bezel (Normal position) Second click (Time setting) [Module 4746] Crown (Normal position) 30 First click (Day setting) First click (Day, day of week setting) Crown (Normal position) SUN 30 Second click (Time setting) [Days of the Week] English Spanish SUN DOM MON LUN TUE MAR WED MIER THU JUEV FRI VIER SAT SAB Rotate the elapsed time bezel to align the 1 0 mark with the minute hand. 0 5 After certain amount of time elapsed, read the 2 0 0 graduation on the elapsed time bezel which 4 30 the minute hand points to. The elapsed time is indicated. • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. Elapsed time bezel 1
Hướng dẫn sử dụng Đồng hồ Nam Casio AW-49H-1BVDF, mẫu mã mới
Download!
MA0310-EA About This Manual Operation Guide 3321 • Button operations are indicated using the letters shown in the illustration. • Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be found in the "Reference" section. General Guide • Press B to change from mode to mode. Timekeeping Mode Calendar Mode Alarm Mode Dual Time Mode Stopwatch Mode Press . Timekeeping Alarm Use this mode to set the current time. An incorrect digital time setting will cause incorrect operation of the calendar. To set the digital time Hour hand Minute hand Hold down . Press . Press . When the Daily Alarm is turned on, an alarm sounds for 20 seconds at the preset time each day. When the Hourly Time Signal is turned on, the watch beeps every hour on the hour. • You can configure alarm settings and Hourly Time Signal settings in the Alarm Mode, which you enter by pressing B. To set the alarm time and to turn the Daily Alarm and Hourly Time Signal on and off Alarm on indicator PM indicator Hour Seconds Seconds Hour 12/24 Minutes Press . Press . Mode indicator Minutes Press . Hold down Press Left Right . . 1. In the Timekeeping Mode, hold down C until the seconds digits start to flash, minutes minutes which indicates the setting screen. 2. Press B to reset the seconds to 00. 3. Press C to move the selection to the hour digits. 4. Press B to increase the hour digits. Hour Press . digit Hour digit Alarm/Hourly Time Signal setting Press . 5. Press C to move the selection to the minutes digits. 6. Press B to increase the minutes digits. Minutes Hourly time signal on indicator 7. Press C to move the selection to 12/24. 8. Press B to toggle the timekeeping format between 12-hour and 24-hour. 9. Press C to exit the setting screen. • Resetting the seconds to 00 while the current count is in the range of 30 to 59 causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are reset to 00 without changing the minutes. • With the 12-hour format, the P (PM) indicator appears on the display for times in the range of noon to 11:59 p.m. and no indicator appears for times in the range of midnight to 11:59 a.m. • With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without any indicator. To set the hands In any mode, press A with a thin object to advance the analog time setting. Each 1. In the Alarm Mode, hold down C until the hour digits start to flash, which indicates the setting screen. 2. Press B to increase the hour digits. • The 12/24-hour format of the alarm time matches the format you select for normal timekeeping. 3. Press C to move the selection to the left minutes digit. 4. Press B to increase the left minutes digit. 5. Press C to move the selection to the right minutes digit. 6. Press B to increase the right minutes digit. 7. Press C to move to the Daily Alarm and Hourly Time Signal on and off setting. 8. Press B to cycle through the Daily Alarm and Hourly Time Signal settings as shown in the sequence below. • At this time Daily Alarm and Hourly Time Signal automatically turn on. .Press press of A advances the time by 20 seconds. Three presses advance by one minute. Holding down A advances the analog setting at high speed. You can only advance the setting. You cannot reverse it. Press .Press . Calendar Use this mode to set today's date (month, day, day of the week). To set the date Hold down . Press . Press . Both ON Hourly Time Both OFF Signal only Daily Alarm only Press . 9. Press C to exit the setting screen. To stop the alarm Press any button to stop the alarm after it starts to sound. To test the alarm and select an alarm tone Hold down B in any mode (except when making any settings) to sound the alarm. Note that the alarm sound changes each time you hold down B to test the alarm. Month Day Day of week Month Day of week Day Press . There are a total of four different alarm sounds. The last alarm sound you hear when performing the above test is the one that is used for the Daily Alarm and the Hourly Time Signal. • Note that holding down B also changes the mode. 1. In the Calendar Mode, hold down C until the month digits start to flash, which indicates the setting screen. 2. Press B to increase the month digits. 3. Press C to move the selection to the day digits. 4. Press B to increase the day digits. 5. Press C to move the selection to the day of the week. 6. Press B to advance to the next day. 7. Press C to exit the setting screen. • The watch does not make any allowance for leap years. Be sure to manually set February 29 when one occurs during a leap year. 1 Operation Guide 3321 Dual Time The Dual Time Mode lets you keep track of time in a different time zone. • In the Dual Time Mode, the seconds count is synchronized with the seconds count of the Timekeeping Mode digital time. To set the Dual Time Hold down . Press . Press . Hour Minutes 12/24 Mode indicator Hour Seconds Press . Minutes 1. In the Dual Time Mode, hold down C until the hour digits start to flash, which indicates the setting screen. 2. Press B to increase the hour digits. 3. Press C to move the selection to the minutes digits. 4. Press B to increase the minutes digits. 5. Press C to move the selection to 12/24. 6. Press B to toggle the timekeeping format between 12-hour and 24-hour. 7. Press C to exit the setting screen. • With the 12-hour format, the P (PM) indicator appears on the display for times in the range of noon to 11:59 p.m. and no indicator appears for times in the range of midnight to 11:59 a.m. • With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without any indicator. Stopwatch The Stopwatch Mode lets you measure elapsed time. The Mode indicator range of the stopwatch is 59 minutes, 59.99 seconds. • The stopwatch continues to run, restarting from zero after it reaches its limit, until you stop it. • The stopwatch measurement operation continues even if you exit the Stopwatch Mode. To use the Stopwatch 1. In the Stopwatch Mode, press C to start the stopwatch. 2. Press C to stop the time measurement. Minutes 1/100 second Seconds Reference • You can press C as many times as you want to resume and stop timing. 3. After you are finished using the stopwatch, hold down C to clear the stopwatch time to all zeros. This section contains more detailed and technical information about watch operation. It also contains important precautions and notes about the various features and functions of this watch. Auto return features If you leave a screen with flashing digits for one or two minutes without performing any operation, the watch automatically saves any settings you have made up to that point and exits the setting screen. Scrolling The B button is used to scroll through setting screen data on the display. Holding down this button during a scroll operation scrolls through the data at high speed. 2
Hướng dẫn sử dụng Đồng hồ Nam Casio AW-48HE-1AVDF, mẫu mã mới
Download!
MA0801-EA Operation Guide ANALOG (HK-W) • Your watch may differ somewhat from the one shown in the illustration. [Modules 1362, 1398, 1770, 2799, 3378, 4370] To set the time Pull out the crown. Set the hands by rotating the crown. Push the crown back in on a time signal to resume timekeeping. [Modules 705, 706, 1300, 1311, 1330, 1344, 1360, 1399, 1747, 1771, 4394, 5049] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. [Modules 707, 708, 1331, 1332, 1342, 1345, 1346, 1787, 2717, 2718, 2719, 2725, 2731, 2748, 2749, 2783, 2784, 3363, 3711, 3712, Crown [Modules 1782, 4328, 4747] Crown First click (Day setting) Crown 4393, 5025, 5044] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day • Avoid setting the day between 8:00 p.m. and 2:00 a.m. The day may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown. 3. Push the crown back in to its normal position. [Modules 709, 1333, 1347, 3716] To set the time 1. When the second hand is at 12 o'clock, pull out the crown to the second click to stop it. 2. Set the hands by rotating the crown. Move the minute hand four or five minutes past the setting you want, and then back them up to the setting. 3. Push the crown back in on a time signal to resume timekeeping. To set the day and day of the week • Avoid setting the day and day of the week between 8:00 p.m. and 4:00 a.m. The day and day of the week may not change in the following day if you do. 1. Pull out the crown to the first click. 2. Set the day by rotating the crown counterclockwise. 3. Set the day of the week by rotating the crown clockwise. Confirm that the correct language (English or Spanish) is selected. 4. Push the crown back in to its normal position. ■ For watch with the elapsed time bezel (Normal position) Second click (Time setting) [Module 4746] Crown (Normal position) 30 First click (Day setting) First click (Day, day of week setting) Crown (Normal position) SUN 30 Second click (Time setting) [Days of the Week] English Spanish SUN DOM MON LUN TUE MAR WED MIER THU JUEV FRI VIER SAT SAB Rotate the elapsed time bezel to align the 1 0 mark with the minute hand. 0 5 After certain amount of time elapsed, read the 2 0 0 graduation on the elapsed time bezel which 4 30 the minute hand points to. The elapsed time is indicated. • Some water resistant models are equipped with a screw lock crown. • With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns. • Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting. Elapsed time bezel 1
Hướng dẫn sử dụng Đồng hồ Nữ Baby-G BGD-560SK-7DR, mẫu mã mới
Download!
MA1310-EA © 2014 CASIO COMPUTER CO., LTD. Operation Guide 3290 About This Manual ξ All of the displays in this manual show black-on-white. ξ Button operations are indicated using the letters shown in the illustration. Contents General Guide ..........................................................................................................E-4 Timekeeping .............................................................................................................E-6 World Time .............................................................................................................E-11 E ξ Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be found in the "Reference" section. Stopwatch ..............................................................................................................E-13 Countdown Timer ..................................................................................................E-15 Alarms ....................................................................................................................E-17 Illumination ............................................................................................................E-22 Reference ...............................................................................................................E-24 Specifi cations ........................................................................................................E-27 E-1 Procedure Lookup The following is a handy reference list of all the operational procedures contained in this manual. To set the time and date .........................................................................................E-7 To toggle the Timekeeping Mode time between DST and Standard Time .......E-10 To view the time in another city code ..................................................................E-11 To toggle a city code time between Standard Time and Daylight Saving Time .................................................................................E-12 To measure times with the stopwatch .................................................................E-14 To use the countdown timer .................................................................................E-15 To set the countdown start time ..........................................................................E-16 To set an alarm time ..............................................................................................E-18 To test the alarm ....................................................................................................E-19 To turn an alarm on and off ..................................................................................E-20 To turn the Hourly Time Signal on and off ..........................................................E-21 E-2 General Guide ξ Press C to change from mode to mode. ξ In any mode (except when a setting screen is on the display), press B to illuminate the display. To illuminate the display .......................................................................................E-23 To specify the illumination duration ...................................................................E-23 To turn the button operation tone on and off .....................................................E-24 E-3 Timekeeping Mode C World Time Mode C Stopwatch Mode Countdown Timer Mode Alarm Mode C C E-4 C E-5 Timekeeping Use the Timekeeping Mode to set and view the current To set the time and date 1. In the Timekeeping Mode, hold down A until the PM indicator Day of week Day time and date. Read this before you set the time and date ! The times displayed in the Timekeeping Mode and World Time Mode are linked. Because of this, make sure you select a city code for your Home City (the city where you seconds start to fl ash, which indicates the setting screen. 2. Press C to move the fl ashing in the sequence shown below to select other settings. normally use the watch) before you set the time and date. CCCC Hour : Minutes ξ To view the current Home City code setting, press A while in the Timekeeping Mode. ξ For full information on city codes, see the "City Code Table" at the back of this manual. Seconds City Code C DST Hour Minutes C Seconds E-6 Day Month Year C C C 12/24-Hour Format E-7 3. When the setting you want to change is fl ashing, use D and B to change it as described below. Screen To do this: Do this: Reset the seconds to Press D. Change the city code Use D (east) and B (west). Toggle between Daylight Saving Time ( ) and Standard Time ( ) Press D. Change the hour or minutes Use D (+) and B (–). Toggle between 12-hour ( ) and 24-hour ( ) timekeeping Press D. Change the year, month, or day Use D (+) and B (–). ξ See "Daylight Saving Time (DST)" (page E-10) for details about the DST setting. E-8 4. Press A to exit the setting screen. ξ Resetting the seconds to while the current count is in the range of 30 to 59 causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are reset to without changing the minutes. ξ With the 12-hour format, the P (PM) indicator appears on the display for times in the range of noon to 11:59 p.m. and the A (AM) indicator appears for times in the range of midnight to 11:59 a.m. ξ With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without any indicator. ξ The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is applied in all modes. ξ The year can be set in the range of 2000 to 2099. ξ The watch's built-in full automatic calendar makes allowances for different month lengths and leap years. Once you set the date, there should be no reason to change it except after you have the watch's battery replaced. ξ The day of the week is automatically displayed in accordance with the date (year, month, and day) settings. E-9 Daylight Saving Time (DST) Operation Guide 3290 World Time Daylight Saving Time (summer time) advances the time setting by one hour from Standard Time. Remember that not all countries or even local areas use Daylight Saving Time. To toggle the Timekeeping Mode time between DST and Standard Time City code World Time shows the current time in 48 cities (29 time zones) around the world. ξ All of the operations in this section are performed in the World Time Mode, which you enter by pressing C DST indicator 1. In the Timekeeping Mode, hold down A until the seconds start to fl ash, which indicates the setting screen. 2. Press C twice to display the DST setting screen. 3. Press D to toggle between Daylight Saving Time ( ) (page E-4). To view the time in another city code In the World Time Mode, press D to scroll eastwardly through city codes. ξ For full information about city codes, see the "City Code Current time in the zone of the selected city code E-10 On/Off status and Standard Time ( ). 4. Press A to exit the setting screen. ξ The DST indicator is displayed on the Timekeeping Mode and Alarm Mode screen while Daylight Saving Time is turned on. Table" at the back of this manual. ξ If the current time shown for a city is wrong, check your Timekeeping Mode time and Home City code settings and make the necessary changes. E-11 To toggle a city code time between Standard Time and Daylight Saving Time Stopwatch DST indicator 1. In the World Time Mode, use D to display the city code (time zone) whose Standard Time/Daylight Saving Time setting you want to change. 2. Hold down A for about one second to toggle between Daylight Saving Time (DST indicator displayed) and Minutes The stopwatch lets you measure elapsed time, split times, and two fi nishes. ξ The display range of the stopwatch is 59 minutes, 59.99 seconds. ξ The stopwatch continues to run, restarting from zero after Standard Time (DST indicator not displayed). ξ The DST indicator is on the display whenever you display a city code for which Daylight Saving Time is turned on. ξ Note that the DST/Standard Time setting affects only the currently displayed city code. Other city codes are it reaches its limit, until you stop it. ξ The stopwatch measurement operation continues even if you exit the Stopwatch Mode. ξ Exiting the Stopwatch Mode while a split time is frozen on the display clears the split time and returns to elapsed Seconds 1/100 second E-12 not affected. ξ In the World Time Mode, you can switch the city code you currently have selected as your Timekeeping Mode Home City between Standard Time and DST. The setting you select in the World Time Mode will also be applied in the Timekeeping Mode. time measurement. ξ All of the operations in this section are performed in the Stopwatch Mode, which you enter by pressing C (page E-5). E-13 To measure times with the stopwatch Elapsed Time D D D D A Start Stop Re-start Stop Clear Split Time D A A D A Countdown Timer Hours The countdown timer can be set within a range of one minute to 24 hours. An alarm sounds when the countdown reaches zero. ξ The countdown operation continues even if you exit the Countdown Timer Mode. Start Split ( displayed) Two Finishes Split release Stop Clear ξ All of the operations in this section are performed in the Countdown Timer Mode, which you enter by pressing C (page E-5). D A D A A To use the countdown timer Start Split First runner fi nishes. Display time of fi rst runner. E-14 Stop Second runner fi nishes. Split release Display time of second runner. Clear Minutes Seconds Press D while in the Countdown Timer Mode to start the countdown timer. ξ When the end of the countdown is reached, the alarm sounds for 10 seconds or until you stop it by pressing any button. The countdown time is automatically reset to its starting value after the alarm stops. E-15 ξ Press D while a countdown operation is in progress to pause it. Press D again to resume the countdown. Alarms You can set fi ve independent Daily Alarms. When an alarm ξ To completely stop a countdown operation, fi rst pause it (by pressing D), and then press A. This returns the countdown time to its starting value. To set the countdown start time 1. In the Countdown Timer Mode, hold down A until the hours of the countdown start time start to fl ash, which indicates the setting screen. 2. Press C to move the fl ashing between the hours and minutes. Alarm number is turned on, the alarm tone sounds when the alarm time is reached. One of the alarms is a snooze alarm, while the other four are one-time alarms. You can turn on an Hourly Time Signal that causes the watch to beep twice every hour on the hour. ξ There are six screens in the Alarm Mode. Four are for one-time alarms (indicated by numbers from through ), one is for a snooze alarm (indicated by 3. While a setting is fl ashing, use D (+) or B (–) to change it. ξ To set the starting value of the countdown time to On/Off status Alarm time ), and one is for the Hourly Time Signal (indicated by ). ξ All of the operations in this section are performed in the 24 hours, set . 4. Press A to exit the setting screen. E-16 (Hour : Minutes) Alarm Mode, which you enter by pressing C (page E-5). E-17 To set an alarm time 1. In the Alarm Mode, use D to scroll through the alarm screens until the one whose time you want to set is displayed. ξ To set a one-time alarm, display one of the screens indicated by an alarm number from through . To set the snooze alarm, display the screen indicated by . ξ The snooze alarm repeats every fi ve minutes. 2. After you select an alarm, hold down A until the hour setting of the alarm time starts to fl ash, which indicates the setting screen. ξ This operation turns on the alarm automatically. 3. Press C to move the fl ashing between the hour and minute settings. E-18 4. While a setting is fl ashing, use D (+) and B (–) to change it. ξ When setting the alarm time using the 12-hour format, take care to set the time correctly as a.m. (A indicator) or p.m. (P indicator). 5. Press A to exit the setting screen. Alarm Operation The alarm sounds at the preset time for about 10 seconds, regardless of the mode the watch is in. In the case of the snooze alarm, the alarm operation is performed a total of seven times, every fi ve minutes, or until you turn the alarm off (page E-20). ξ To stop the alarm tone after it starts to sound, press any button. ξ Performing any one of the following operations during a 5-minute interval between snooze alarms cancels the current snooze alarm operation. Displaying the Timekeeping Mode setting screen (page E-7) Displaying the setting screen (page E-18) To test the alarm In the Alarm Mode, hold down D to sound the alarm. E-19 To turn an alarm on and off Operation Guide 3290 To turn the Hourly Time Signal on and off Alarm on indicator On/Off status Snooze alarm indicator E-20 Illumination 1. In the Alarm Mode, use D to select an alarm. 2. Press A to toggle it on ( displayed) and off ( displayed). ξ Turning on a one-time alarm ( through ) displays the alarm on indicator on its Alarm Mode screen. ξ Turning on the snooze alarm ( ) displays the alarm on indicator and snooze alarm indicator on the Alarm Mode snooze alarm screen. ξ In all modes, the alarm on indicator is shown for any alarm that is currently turned on. ξ The alarm on indicator fl ashes while the alarm is sounding. ξ The snooze alarm indicator fl ashes during the 5-minute intervals between alarms. Hourly time signal on indicator On/Off status To illuminate the display 1. In the Alarm Mode, use D to select the Hourly Time Signal ( ). 2. Press A to toggle it on ( displayed) and off ( displayed). ξ The Hourly Time Signal on indicator is shown on the display in all modes while the Hourly Time Signal is turned on. E-21 This watch has an EL (electro-luminescent) panel that causes the entire display to glow for easy reading in the dark. Illumination Precautions ξ The electro-luminescent panel that provides illumination loses power after very long use. ξ Illumination may be hard to see when viewed under direct sunlight. In any mode (except when a setting screen is on the display), press B to turn on illumination. ξ You can use the procedure below to select either 1.5 seconds or 3 seconds as the illumination duration. When you press B, the illumination will remain on for about 1.5 seconds or 3 seconds, depending on the current illumination duration setting. To specify the illumination duration 1. In the Timekeeping Mode, hold down A until the seconds start to fl ash, which indicates the setting E-22 ξ The watch may emit an audible sound whenever the display is illuminated. This is due to vibration of the EL panel used for illumination, and does not indicate malfunction. ξ Illumination automatically turns off whenever an alarm sounds. ξ Frequent use of illumination runs down the battery. screen. 2. While the seconds are fl ashing, press B to toggle the illumination duration between 1.5 seconds ( ) and 3 seconds ( ). 3. Press A to exit the setting screen. E-23 Reference This section contains more detailed and technical information about watch operation. It also contains important precautions and notes about the various features and functions of this watch. Button Operation Tone The button operation tone sounds any time you press one ξ Holding down C to turn the button operation tone on or off also causes the watch's current mode to change. ξ The mute indicator is displayed in all modes when the button operation tone is turned off. Auto Return Features ξ If you leave the watch in the Alarm Mode for two or three minutes without performing Mute indicator of the watch's buttons. You can turn the button operation tone on or off as desired. ξ Even if you turn off the button operation tone, the alarm, Hourly Time Signal, and Countdown Timer Mode alarm any operation, it automatically changes to the Timekeeping Mode. ξ If you leave a screen with fl ashing digits or a cursor on the display for two or three minutes without performing any operation, the watch automatically saves any settings you have made up to that point and exits the setting screen. E-24 all operate normally. To turn the button operation tone on and off In any mode (except when a setting screen is on the display), hold down C to toggle the button operation tone on ( not displayed) and off ( displayed). Scrolling The B and D buttons are used in various modes and setting screens to scroll through data on the display. In most cases, holding down these buttons during a scroll operation scrolls at high speed. E-25 Initial Screens When you enter the World Time or Alarm Mode, the data you were viewing when you last exited the mode appears fi rst. World Time ξ The seconds count of the World Time is synchronized with the seconds count of the Timekeeping Mode. ξ All World Time Mode times are calculated from the current Home City time in the Timekeeping Mode using UTC time differential values. ξ The UTC differential is a value that indicates the time difference between a reference point in Greenwich, England and the time zone where a city is located. ξ The letters "UTC" is the abbreviation for "Coordinated Universal Time", which is the world-wide scientifi c standard of timekeeping. It is based upon carefully maintained atomic (cesium) clocks that keep time accurately to within microseconds. Leap seconds are added or subtracted as necessary to keep UTC in sync with the Earth's rotation. E-26 Alarms: 5 daily alarms (4 one-time alarms: 1 snooze alarm); Hourly Time Signal Illumination: EL Backlight (electro-luminescent panel); Selectable illumination duration Other: Button operation tone on/off Battery: One lithium battery (Type: CR1616) Approximately 3 years on type CR1616 (assuming alarm operation 10 seconds per day, and one illumination operation 1.5 seconds per day) The above battery life is shortened by illumination as shown below. ξ 5 illumination operations (10 seconds) per day: approximately 2.5 years ξ 10 illumination operations (20 seconds) per day: approximately 1.7 years E-28 Specifi cations Accuracy at normal temperature: ±30 seconds a month Timekeeping: Hour, minutes, seconds, a.m. (A)/p.m. (P), day, day of the week Time format: 12-hour and 24-hour Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099 Other: Home City code (can be assigned one of 48 city codes); Daylight Saving Time (summer time)/Standard Time World Time: 48 cities (29 time zones) Other: Daylight Saving Time/Standard Time Stopwatch Measuring unit: 1/100 second Measuring capacity: 59' 59.99'' Measuring modes: Elapsed time, split time, two fi nishes Countdown Timer Measuring unit: 1 second Input range: 1 minute to 24 hours (1-minute increments and 1-hour increments) E-27 City Code Table L-1 City Code Table Operation Guide 3290 City Code City UTC Offset/ GMT Differential Other major cities in same time zone RAI Praia –1 LIS Lisbon 0 Dublin, Casablanca, Dakar, Abidjan LON London BCN Barcelona +1 Amsterdam, Algiers, Hamburg, Frankfurt, Vienna, Madrid, Stockholm PAR Paris MIL Milan ROM Rome BER Berlin ATH Athens +2 Helsinki, Beirut, Damascus, Cape Town JNB Johannesburg IST Istanbul CAI Cairo JRS Jerusalem MOW** Moscow +3 Kuwait, Riyadh, Aden, Addis Ababa, Nairobi JED Jeddah City Code City UTC Offset/ GMT Differential Other major cities in same time zone PPG Pago Pago –11 HNL Honolulu –10 Papeete ANC Anchorage –9 Nome YVR Vancouver –8 Las Vegas, Seattle/Tacoma, Dawson City SFO San Francisco LAX Los Angeles DEN Denver –7 Edmonton, El Paso MEX Mexico City –6 Houston, Dallas/Fort Worth, New Orleans, Winnipeg CHI Chicago MIA Miami –5 Montreal, Detroit, Boston, Panama City, Havana, Lima, Bogota NYC New York CCS* Caracas –4 La Paz, Santiago, Port Of Spain YYT St. Johns –3.5 RIO Rio De Janeiro –3 Sao Paulo, Buenos Aires, Brasilia, Montevideo L-2 City Code City UTC Offset/ GMT Differential Other major cities in same time zone THR Tehran +3.5 Shiraz DXB Dubai +4 Abu Dhabi, Muscat KBL Kabul +4.5 KHI Karachi +5 MLE Male DEL Delhi +5.5 Mumbai, Kolkata, Colombo DAC Dhaka +6 RGN Yangon +6.5 BKK Bangkok +7 Phnom Penh, Hanoi, Vientiane, Jakarta SIN Singapore +8 Kuala Lumpur, Taipei, Manila, Perth, Ulaanbaatar HKG Hong Kong BJS Beijing SEL Seoul +9 Pyongyang TYO Tokyo ADL Adelaide +9.5 Darwin L-4 L-3 City Code City UTC Offset/ GMT Differential Other major cities in same time zone GUM Guam +10 Melbourne, Rabaul SYD Sydney NOU Noumea +11 Port Vila WLG Wellington +12 Christchurch, Nadi, Nauru Island ξ This table shows the city codes of this watch. ξ The rules governing global times (UTC offset and GMT differential) and summer time are determined by each individual country. * As of June 2013, the offi cial UTC offset for Caracas, Venezuela (CCS) has been changed from –4 to –4.5, but this watch still uses an offset of –4 (the old offset) for CCS. ** As of June 2013, the offi cial UTC offset for Moscow, Russia (MOW) has been changed from +3 to +4, but this watch still uses an offset of +3 (the old offset) for MOW. Because of this, you should leave the summer time setting turned on (which advances the time by one hour) for the MOW time. L-5
Subscribe to:
Posts (Atom)
Hướng dẫn sử dụng Đồng hồ Nam Edifice Casio EFR-526L-7AVUDF, mẫu mã mới
Download! MA1212-EA Ú #!3)/#/-054%2#/ ,4$ Operation Guide 5345 ξ Your watch may differ somewhat from the one shown in the illustra...
-
Download! MA1104-EA About This Manual Operation Guide 3284 ξ Note that the product illustrations in this manual are intended for refer...
-
Download! Hướng dẫn sử dụng Máy Sấy Tóc Áp dụng cho các model: HDB-1825W HDB-1826 HDB-1828F HDB-1839 Hãy giữ lại Hướng Dẫn Sử Dụng vì...
-
Download! How to use this manual MITSUBISHI ELECTRIC 座檯電風扇 ELECTRIC DESK FAN 「零部件名稱/PART NAME 型號/MODEL D12-GJ/GO- PR16-GC/GO- P R18-G3...